Closed Thread
Results 1 to 8 of 8

Reload Thread: a real question on box construction

  1. #1
    rustycar's Avatar
    rustycar is offline Member



    Join Date
    Apr 2004
    Location
    harrisville
    Age
    30
    Posts
    143
    Post Thanks / Like
    Mentioned
    0 Post(s)

    a real question on box construction

    ok, two questions
    iam building a slot ported box for a 10.
    now my plans consist of a L shaped port that raps around two sides of the box.
    the port is 1.75 in wide .
    i was wondering about the other end of the of the port (one on the inside of box)
    in my diagram i labeled the area in question with a ( x )
    #1 dose the board labled ( a ) have to be 1.75in from each side ( f ) and ( c )???
    #2 and dose the area (x) include in the: box volume, or port volume???


    ------------------------
    l --------a------- x l
    l l l
    l l l
    f l c
    l l l
    l l---------------------l
    if you didnt understand question #1 than i will try again.
    dose the gap directly below (x) have to equil the port width (1.75)?
    Attached Thumbnails Attached Thumbnails a real question on box construction-slotport3.jpg  
    Last edited by rustycar; 03-01-2005 at 05:09 AM. Reason: no pic







  2. #2
    rustycar's Avatar
    rustycar is offline Member

    Threadstarter


    Join Date
    Apr 2004
    Location
    harrisville
    Age
    30
    Posts
    143
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: a real question on box construction

    dammit my diagram got messed up!!!!!




  3. #3
    Black_Jesus's Avatar
    Black_Jesus is offline The Unexpected



    Join Date
    Aug 2004
    Location
    lamest place humanly possible
    Posts
    1,743
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: a real question on box construction

    mspaint + imageshack




  4. #4
    rustycar's Avatar
    rustycar is offline Member

    Threadstarter


    Join Date
    Apr 2004
    Location
    harrisville
    Age
    30
    Posts
    143
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: a real question on box construction

    ==============
    l..........................x..l
    l===========.....l
    l..............................l
    f..............................c
    l..............................l
    l=============l

    the dots are open air.....




  5. #5
    rustycar's Avatar
    rustycar is offline Member

    Threadstarter


    Join Date
    Apr 2004
    Location
    harrisville
    Age
    30
    Posts
    143
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: a real question on box construction

    ..
    Last edited by rustycar; 03-01-2005 at 05:03 AM. Reason: ?




  6. #6
    rustycar's Avatar
    rustycar is offline Member

    Threadstarter


    Join Date
    Apr 2004
    Location
    harrisville
    Age
    30
    Posts
    143
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: a real question on box construction

    hopefully this works
    Attached Thumbnails Attached Thumbnails a real question on box construction-slotport4.jpg  
    Last edited by rustycar; 03-01-2005 at 05:11 AM. Reason: no file attachd




  7. #7
    squeak9798's Avatar
    squeak9798 is offline Banned



    Join Date
    Jun 2004
    Location
    USA
    Posts
    26,300
    Post Thanks / Like
    Images
    16
    Mentioned
    0 Post(s)

    Re: a real question on box construction

    Quote Originally Posted by rustycar
    #1 dose the board labled ( a ) have to be 1.75in from each side ( f ) and ( c )???
    It needs to be 1.75" from board F (to maintain consistent internal width), and more than 1.75" from C. Also, remember to factor in port end correction since you are using a wall of the box as a wall for the port.


    #2 and dose the area (x) include in the: box volume, or port volume???
    Assuming you space everything out correctly, it would be part of the box volume. If you get board A too close to board C, then that area will act as part of the port (not what you want to have happen).




  8. #8
    rustycar's Avatar
    rustycar is offline Member

    Threadstarter


    Join Date
    Apr 2004
    Location
    harrisville
    Age
    30
    Posts
    143
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: a real question on box construction

    ty, now i can build it .




Closed Thread

Similar Threads

  1. Question about Box designs on RE website
    By S0CalS0L in forum Enclosure Design & Construction Help
    Replies: 3
    Last Post: 02-06-2005, 11:52 AM
  2. box builders... super quick question...
    By g30ffr3y in forum Enclosure Design & Construction Help
    Replies: 1
    Last Post: 12-04-2004, 08:35 PM
  3. Box Question
    By xpartmgr in forum General Discussion
    Replies: 0
    Last Post: 08-12-2002, 11:04 PM
  4. kappa perfect 12.1 box question
    By crzybob77 in forum Subwoofers
    Replies: 1
    Last Post: 06-02-2002, 03:41 AM
  5. Box question?
    By Unregistered in forum Subwoofers
    Replies: 1
    Last Post: 03-06-2002, 11:45 AM

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts

1e2 Forum