Closed Thread
Results 1 to 2 of 2

Reload Thread: Help With Wires

  1. #1
    bumpin_blazer's Avatar
    bumpin_blazer is offline Only the Strong Survive



    Join Date
    Mar 2002
    Location
    Austin,TX
    Age
    32
    Posts
    8,044
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Help With Wires

    ok here is my current wire setup and i was looking to switch it but i'm not sure if i need 0 gauge, or 2 guage or 00gauge. i was thinking single 0 would work fine but i'll let the experts decide. ok i'm running 2 amps with a combined rms power of 1200watts or so. right now it's a shame but i'm only running a 4guage from the battery to fuse distribution block then to dual 8 gauge i know not powering my main amp well enough. i was thinking of going up to a dual ANL fuse block with a 100amp fuse going to my MA audio class X amp and a 60amp anl to my 200.4 amp. you think a 0gauge with dual 4 out would work good for my setup?? or is that too much wire?? thanks for all your help. also what is the best place to buy really good wire online.

    keep it thumpin,
    adam







  2. #2
    Join Date
    Mar 2002
    Location
    S.W. Michigan
    Age
    43
    Posts
    331
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Sounds good !!

    I have 2 amps that run around 500 to 550 watts rms and I'm running 1/0 gauge from the battery and run a 4 gauge out of my dist block to each amp. So that should be fine for what you have.

    Larry




Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum