Airspace req for Eclipse Ti's.. 10s, 12s, 15s

[Bill T.]

Looked all over the net.. not sure if the numbers I came up with will muster.

10" - 1.75cu/ft
12" - 2.5cu/ft
15" - 5cu/ft

15" will not be a TiPro.

Bill

[Diplexers]

12"=3.2 cu ft

10"=2.1 cu ft

15"=6.1 cu ft...all of them ported.

Assuming that the 10 and 12 are Ti Pro's.

The 15 is the Alum.

Hope this helps you.

[pentaX]

There isnt a Titanium Pro 10" or 12". Only made in 15" or 18". Eclipse Titaniums are all in the 9100 series, Pros having the "Pro" suffix at the end.

As for airspace, had good luck with 1.75 cubic to 2 cubic for a 10"; 3.25 cubic for a 12"; 5.5 cubic for a 15". Havent made any boxes for the Pro's just yet.

All were tuned about 28Hz or so.

pentaX

[denim]

Eclipse says to only seal the Tis and ALums, but they both do very well, espically the Ti in ported, the Ti is not the most efficent sub but **** what a beast

[chr0209]

so does ne1 know the airspace needed for a 15" ti sealed?...just the ti...not the pro?

[aznboi986]

There is a thread on termpro about the Ti's. They aren't meant to be sealed even though Eclipse markets them as a small sealed box sub.http://audioforum.termpro.com/cgi-bi...c;f=8;t=020714