component speaker install in 91 civic hatch
ok here's what i have. 1 set of ppi carbonfiber components 6", 1 set of ppi pro aluminum 6" midbass drivers in qform kick panel w/ tweeters from carbon component set, 1 set of memphis 6.5" coaxles, 1 set of polk 5 1/4 coaxles, 2 ppi a404 4 channel 40x4 amps, 1 jbl 10" (bridged mono) in a qlogic sealed box, pioneer dehp7300 cd player.
my question is.... i'm trying to figure out what to use for my highs i was going to use the components in the front tweeters and aluminum cone ppi's in qform. i was going to put either the memphis 6.5's in the door, and the midbbass drivers from the component set in the rear. but i was also thinking about putting the midbass in the doors and the polks in the rear but i wasn't sure if that would be overkill on the midbass in the front.... any idea's or help would greatly be appreciated. all the highs and mids are wired in stereo to the crossovers. please pick my stereo apart <img src="biggrin.gif" border="0">
Jim<br />http://www.cluboms.homestead.com<br />91 Mini-me d16z6 si hatch<br />90 Nissan 240sx se sr20det