Printable View
Right now im running my JLw6V2 at 8 ohms on a Solid Audio F11D, Its receiving around 200rms.
I was wondering if it the JL could handle being run at at 2 ohms for 760rms abouts? From what ive ready its been usually mixed advice and opinion so far on whether it would be wise to.
If you send it a clean 760w RMS, should be fine, depending on the box.
It's in a sealed box about 1.45 after displacement.
Should be fine, mine get about that power (perhaps less with voltage drop) and they're in about 1.9-2 cubes, ported.
ust keep the gain a little lower than max power though i would expect it to handle that power unless u listen to straight dubstep or rap with low low notes
I do occasionally but more along the lines of rock and such.
Depending on your enclosure I would say 500-600 watts is solid for it in the recommended size.
600WRMS is their suggested max (warranty), but if you gain down and send it clean power it should take 750.
Especially if you have appreciable rise around the main freq's
Hopefully it works right, im gonna change it up here in abit and hopefully it doesn't blow lol.