Incriminator Audio Warden T/S Specs Here

[Johnny Law.Lulz]

Yeah its a 90 F150 extended cab. box is 9.37 before all displacements and will be 7.95 after everything tuned to 36 with 2 8" aeros, sub forward in the middle and ports up, one on each side of the truck.

[pawn man]

I agree with that though.

With 2 of them the loudest ive gotten mine is a 154.5 legal, and a 156.2 outlaw.

with 4 20.1's

i am running mine in tubes so not so much imp rise.

[Johnny Law.Lulz]

i am running mine in tubes so not so much imp rise.

im wiring mine to .5 ohms to combat rise a little, eventually ill just get a big enough amp where rise doesnt matter. = )

[sundownz]

I tested a 15" model and got more BL from it -- one that I re-coned for David.

Pretty insane... BL^2/RE is 355 !!!!!!!!!!

Wow... the 12" may have had a problem or something when I tested it as the BL figure of 26.84 is more in line with what IA says is correct.

Now this is just sick... it's nearly double a big bad boy 9" diameter slug SPL motor.

[JL Audio]

I tested a 15" model and got more BL from it -- one that I re-coned for David.

Pretty insane... BL^2/RE is 355 !!!!!!!!!!

Wow... the 12" may have had a problem or something when I tested it as the BL figure of 26.84 is more in line with what IA says is correct.

Now this is just sick... it's nearly double a big bad boy 9" diameter slug SPL motor.

flattery gets you no where, and stop telling people i'm double a big boy 9" ... I know i'm big but jeebus that's a big winkiedink.

[Johnny Law.Lulz]

I tested a 15" model and got more BL from it -- one that I re-coned for David.

Pretty insane... BL^2/RE is 355 !!!!!!!!!!

Wow... the 12" may have had a problem or something when I tested it as the BL figure of 26.84 is more in line with what IA says is correct.

Now this is just sick... it's nearly double a big bad boy 9" diameter slug SPL motor.

Could that be from the difference between broken in and not broken in or is that way too much to be different. Do you know why my 12" wouldve been so much lower. I wonder what my 21" will be.

Could my motor be defective :sad:

flattery gets you no where, and stop telling people i'm double a big boy 9" ... I know i'm big but jeebus that's a big winkiedink.

lulz.

[T3mpest]

bl shouldnt' change by being broken in, that's soft parts, not the magnets or coil.

[Johnny Law.Lulz]

bl shouldnt' change by being broken in, that's soft parts, not the magnets or coil.

Basebalz already told me that, i dont know too much about specs. lulz.

[sundownz]

The DCR was a bit high on the 12" so may have been an issue somewhere. I got a good bit lower DCR on the 15"

[Johnny Law.Lulz]

Is DCR teh impedence or something, you are going to have to put this stuff in idiot terms for me lulz.

[sundownz]

Is DCR teh impedence or something, you are going to have to put this stuff in idiot terms for me lulz.

DC Resistance of the coil.

[Johnny Law.Lulz]

Great, so i just had the fucked up coil, lulz.

Would you be sweet enough to pull specs from the 21" when you get her all nice and built up. = )

[sundownz]

Did you get a gasket for it as well ? They are really hard to get the surround down on without one.

[Johnny Law.Lulz]

Did you get a gasket for it as well ? They are really hard to get the surround down on without one.

I didnt know i needed one. Is there one on the basket David gave you cuz im guessing there should be.

[basebalz13]

I didnt know i needed one. Is there one on the basket David gave you cuz im guessing there should be.

PM'ed him asking. Didnt even realize it was gone.

Jacob check the table or over next to where the basket was laying. When I was breaking it down, I might have took it off and not realized it.