Incriminator Audio Warden T/S Specs Here

[Johnny Law.Lulz]

lulz

[DylanBeatz]

FS: 47.83 Hz

That's a little high isn't it?

[basebalz13]

Warden motor = strong... I approve

Haha, we already proved this with mine. I like the wall socket video we did

[power-fanatic07]

FS: 47.83 Hz

That's a little high isn't it?

BL^2/RE: 278 (nice!)

A standard 9" diameter SPL motor with 8-layer 3" coil typically has 150-200 BL^2/RE... so this thing is strong.

Only thing I have stronger is the Monster prototype (10" slugs and 12-layer coil) @ 360 but the coil is 50% heavier than the Warden and also a 42mm WW so has less excursion.

the BL^2/RE is also a little high

[Johnny Law.Lulz]

the BL^2/RE is also a little high

lulz, just a little bit.

[sundownz]

FS: 47.83 Hz

That's a little high isn't it?

Not really -- the suspension is very stiff so it is to be expected.

Specs are quite good, IMO... I'm sure they are not listed as Nick likes the product to speak for itself rather than rely on the numbers game. Also they are customizable with various suspensions so specs can vary -- as with the MT from RE with no TS posted.

In this instance a customer has paid me to re-cone a woofer and wanted specs measured on the driver as well. I think the specs are great.

[Johnny Law.Lulz]

Not really -- the suspension is very stiff so it is to be expected.

Specs are quite good, IMO... I'm sure they are not listed as Nick likes the product to speak for itself rather than rely on the numbers game. Also they are customizable with various suspensions so specs can vary -- as with the MT from RE with no TS posted.

In this instance a customer has paid me to re-cone a woofer and wanted specs measured on the driver as well. I think the specs are great.

I wish Nick wouldve told me it was customizable, ill bring that up with him tomorrow. We have also had another change of plans that i need to email you about tomorrow.

[sundownz]

He can customize the suspension for your application as they do build them in house. The stock suspensions is VERY stiff... so in theory you could make it stiffer or even a bit softer if you didn't want to run gobs and gobs of power on it. IA can advise you on what is best for your application.

[Johnny Law.Lulz]

He can customize the suspension for your application as they do build them in house. The stock suspensions is VERY stiff... so in theory you could make it stiffer or even a bit softer if you didn't want to run gobs and gobs of power on it. IA can advise you on what is best for your application.

Cool cool, ill proly leave it alone lol. I just need your phone number cuz this is too many emailing lol.

[sundownz]

I'm sure they are not listed as Nick likes the product to speak for itself rather than rely on the numbers game.

I will add that I agree with this... on a driver like this you cannot expect to put it in a box program and predict what is really going to happen. Listen to the box suggestions from the manufacturer and from experience in testing.

[Johnny Law.Lulz]

I will add that I agree with this... on a driver like this you cannot expect to put it in a box program and predict what is really going to happen. Listen to the box suggestions from the manufacturer and from experience in testing.

Im not trying to diss nick but i doubt he tests his woofers like you do to where he knows perfect box sizes for daily and SPL and all.

[basebalz13]

Im not trying to diss nick but i doubt he tests his woofers like you do to where he knows perfect box sizes for daily and SPL and all.

I kinda second that. I asked him for a rough starting point box wise. He said start at 4-4.5 cubes per 15. I told him I had over 25,000 watts on tap for both 15's. He said it will be fine.

Well needless to say Jacob got to play with my wardens...

[RetroAudioinc]

I'm sure they are not listed as Nick likes the product to speak for itself rather than rely on the numbers game.

I will add that I agree with this... on a driver like this you cannot expect to put it in a box program and predict what is really going to happen. Listen to the box suggestions from the manufacturer and from experience in testing.

[Johnny Law.Lulz]

shut up brad. lulz.

[basebalz13]

Thats what I said Retro.

Jacob is agreeing with his own post? LOL