I've got an ESX 1204 amp currently pushing my front components, with the rear two channels bridged and powering a pair of JL 10WO's. I loved the subs but time has not been kind to them. The surrounds have completely deteriorated on both and one of them actually doesn't move at all (I'm hoping it's due to a burnt vc or something else sub-related and not my wiring or amp).
Anyways, I'm looking for a couple of 10 inchers that will give me excellent SQ for as cheap as possible....preferably less than $150 for both, and the cheaper the better. I don't care about SPL at all, just want something that delivers clear, crisp, tight bass with about 200w each (the esq puts out about 400w bridged iirc).
Only catch is that the box/amp is pre-wired in parallel (i think...my car audio knowledge is a bit rusty), as the JL's I currently have are 8 ohms, so I'm gonna need something that comes in 8 ohm versions (or DVC 4 ohms, I believe...please let me know if it's not possible to power 2 DVC 4 ohm subs with a bridged channel and still have a 4 ohm load on the amp).
Also, the box I have is sealed with about .75 cu ft. per sub, iirc.
Thanks for the help.