3 Alpine Type-R 12s to an MTX Thunder81000D
will the speakers and the amp work together with the watts.
MTX / THUNDER81000D
@2ohms 1000w x 1ch.
@4ohms 500w x 1ch.
ALN / SWR1241D
300w RMS Power
1000w Max. Power
Hit me back
it all depends on how you have it wired....each sub has dual 4 ohm VC's right?...if that is the case, you can wire the coils in a series and the speakers in paralell and you will get a 2.7 ohm load, which will pull enough to run each speaker to its RMS power handling...you said three right...yea that is it...there is a diagram for it here
it is at the very very bottom to the left, the one with three subs....check that it should help
this is all possible if the amp is 1000 watts is RMS...if it is 1000 max at 2ohms then it is a different story
that amp will put out AT LEAST that much pwoer, its a beast...
also, the Type r's will handle that much, easily...
are they the dual 4 ohm subs?
MSN - [email protected]
Add me if you have any questions!
Originally Posted by PT Teal
Originally Posted by cleanerupper