+ Reply to Thread
Results 1 to 7 of 7

Reload Thread: Buying a New Car, New Speaker time!

  1. #1
    Claviger's Avatar
    Claviger is offline Junior Member



    Join Date
    Sep 2013
    Location
    Georgia
    Posts
    2
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Buying a New Car, New Speaker time!

    My current setup is a set of 6.5 and Hi-Vi speakers for front stage and a single Sundown Audio Sa-12D2. The front stage is run off an amazing a/d/s amp and the sub is powered (well) by my Zapco 750.2 running at 1ohm bridged.

    I am buying a new car that has 6x9s in the doors both front and rear as well as dual 8" subs and 2x3" tweeters in the dash. The vehicle were buying is slightly larger inside so I am going to add more and would like some 6x9 recommendations if you would please. I will be adding a 2nd Sa-12, possibly a second 750.2 or switch to a much larger zapco (read 2k+), and need a front stage that wont get smothered by the bass while retaining clarity. The stock subs are going away completely.

    Sets I am considering:
    Image Dynamics CTX69
    DDAudio CXS 6x9
    JL Audio TR690-TXi
    Alpine SPR-69

    They need to be able to pull good mid-bass duty from 90hz and up, and will have about 90 watts to do it per speaker. From these four which is the best and why (mostly dubstep and metal with some rap included).







  2. #2
    calebkhill's Avatar
    calebkhill is offline CarAudio.com Elite



    Join Date
    Dec 2012
    Location
    Phenix City, Alabama
    Posts
    1,101
    Post Thanks / Like
    Mentioned
    2 Post(s)

    Re: Buying a New Car, New Speaker time!

    Let me tell you something boss.

    I just put my old Rockford Fosgate 6x9s in up front(first speakers i bought when i first got into ca).

    I've made a ton of changes, took them out completely, used them as rear fill attenuated, everything. And for the past six months I've e had them in the rear deck turned down at 80hz-300hz while i changed my entire system inside and out.

    But my most recent change (probably permanent unless i go 8" up front), was removing those 8ohm Anarchy's up front and putting the 6x9s in place of them. (not trying to start an anarchy thread here)

    These things rock as midbass..... I've never used them for this purpose, up front midbass, but an now starting yesterday, and I'm completely amazed and satisfied with them. They sound great. They are coax, but I'm only running them 80hz-250ish...

    I'll check those you mentioned though. I think I'd rather have a 6x9 woofer rather than a coax.

    By the way, zapco owns!

    ---------- Post added at 09:18 PM ---------- Previous post was at 09:18 PM ----------

    That's the t1693 by Rockford



    "When I listen to a stereo loudspeaker playback in my room and an auditory scene has formed in my mind, how would I know that what I hear is an accurate replica of an auditory scene that could be had at the recording venue? Or more generally, that this is an auditory scene that could have existed at all?"


  3. #3
    bbeljefe's Avatar
    bbeljefe is online now Premium Member bbeljefe is a Supporting Member of the forum!



    Join Date
    Jul 2013
    Location
    Shreveport, LA
    Posts
    1,740
    Post Thanks / Like
    Mentioned
    20 Post(s)

    Re: Buying a New Car, New Speaker time!

    Sundown Neo Pro 8s on baffles with ~200wpc will keep up. But you'll need to add tweets and I would recommend active instead of passive crossovers with about 50-75wpc on the tweets. ← Use the passive crossovers that come with the tweeters for higher power.

    Twenty five watts per channel on tweets would be fine but those amps aren't plentiful in car audio.



    Owner, Audio Anarchy, LLC
    2915 Youree Drive, Shreveport, LA
    318-780-6149

    Authorized Dealer in NW Louisiana for CT Sounds & Execution Audio. We also carry other products but you really don't want that stuff... ;-)


  4. Dislikes Why So Cereal? disliked this post
  5. #4
    Claviger's Avatar
    Claviger is offline Junior Member

    Threadstarter


    Join Date
    Sep 2013
    Location
    Georgia
    Posts
    2
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Buying a New Car, New Speaker time!

    Thanks for the replies so quickly guys!

    The concept I am running through my head is:

    The very smooth tweets I already have custom surface mounted facing the passengers on the dash running of my A/D/S amp actively crossed around 2500 (ish).
    Running a set of coax 6x9s in the front doors off the other two channels on the same amp to fill the front stage actively bandpass filtered from 200hz(ish) to 2500hz(ish).
    Then using my extra amp (Alpine MRV-F407) bridged to run the rear door 6x9s from 80hz or 90hz to 250hz(ish) for mid bass. It puts out solid power for mid bass with a nice clean signal.
    Finally of the Dual 750.2 and dual sa-12 or Zapco 2k and dual sa-12.

    You think this concept will blend well or sound all crazy and separated?

    Sadly 8s up front are out of the question due to mounting depth and my wifes tolerance to me hacking up a 0 mile car lol.




  6. #5
    calebkhill's Avatar
    calebkhill is offline CarAudio.com Elite



    Join Date
    Dec 2012
    Location
    Phenix City, Alabama
    Posts
    1,101
    Post Thanks / Like
    Mentioned
    2 Post(s)

    Re: Buying a New Car, New Speaker time!

    Should sound nice with some tuning.
    I had nearly the same set up a while back.



    "When I listen to a stereo loudspeaker playback in my room and an auditory scene has formed in my mind, how would I know that what I hear is an accurate replica of an auditory scene that could be had at the recording venue? Or more generally, that this is an auditory scene that could have existed at all?"


  7. #6
    trumpet's Avatar
    trumpet is online now Supporting Vendor trumpet is a Supporting Member of the forum!

    trumpet is a Supporting Vendor of the forum!

    Join Date
    Jan 2011
    Location
    Langdon, ND
    Age
    33
    Posts
    4,378
    Post Thanks / Like
    Mentioned
    75 Post(s)

    Re: Buying a New Car, New Speaker time!

    The way I would do it is 6x9 subs in the front doors for midbass up to 1 kHz, 3" mids in the dash, and 1" imaging tweeters on the windshield. What I'm talking about is a can be done with CDT Audio speakers. The mids and tweeters could be run on passives with the subs run active so you can run the 6 speakers on 4 channels.




    Small town service, family owned and operated. See our new mobile friendly web site at www.513electronics.com
    Home to CDT Audio's Systems Design Specialist
    Our CDT Audio dealer store, Clarion,_JBL,_Pioneer,_Precision_Power,_RE_Audio,_DB Drive,_Metra,_T-Spec, perfect fit speaker kits for your vehicle
    My system: Pioneer AVH-4000NEX, JBL MS-8, Clarion XC6610 x 2, CDT 6.7"/4"/1.1" in the front doors, 4"/1.1" center channel, QES-1220 12" x 2, Clarion SRG-1622R rear fill

  8. #7
    Why So Cereal?'s Avatar
    Why So Cereal? is offline Invisible Cereal



    Join Date
    Sep 2010
    Location
    Drowning in milk
    Posts
    7,403
    Post Thanks / Like
    Mentioned
    74 Post(s)

    Re: Buying a New Car, New Speaker time!

    My car came setup the same way and I simply made a baffle to change the 6x9 spot in the door to one suitable for a 6.5.


    This opens up your choices a lot more to find a better driver for your money.

    I say do that; and just get a basic 2 way 6.5 comp set with the tweeters mounted either in the stock dash locations or on the windshield (whichever you choose).




+ Reply to Thread

Similar Threads

  1. New car, new speaker problem
    By tigerf117 in forum Speakers
    Replies: 14
    Last Post: 04-18-2007, 05:42 PM
  2. New car, new speakers!
    By krouchchocolate in forum Speakers
    Replies: 9
    Last Post: 03-13-2007, 03:27 AM
  3. New Car 1 Speaker =/..
    By CamaroSS2001x in forum Amplifiers
    Replies: 6
    Last Post: 01-16-2007, 11:16 PM
  4. New Car, New Speakers
    By Harrison in forum Speakers
    Replies: 0
    Last Post: 03-23-2005, 08:26 PM
  5. HELP ! New Car Needs Speakers
    By granatelli in forum Wiring, Electrical and Installation Help
    Replies: 2
    Last Post: 04-12-2002, 07:28 PM

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts

1e2 Forum