Printable View
So I ordered a set of components that have a 1/2" tweeter and does not have a surface mount option (only flush)
I have an old beater car with the auto seatbelts so cannot flush mount int the pillars and I'm really not
skilled enough to make a pod
should. I
a: mount in the dash
b: mount on the door
or c: your option
http://i117.photobucket.com/albums/o...2/IMAG0140.jpg
Why not do an A-pillar mount?? I think those look really clean! & you can have them level with your ears. :-)Quote:
Originally Posted by campbell8402
Will be more work, but you should velcro the tweets in different locations and find where you like them most
Pillar has a motor for the automatic seatbelts
ThisQuote:
Originally Posted by Slayerx
A pillar the front pillar that holds the windshield the one in the picture. The velcro is a great idea, you would be surprised how different each location sounds.Quote:
Originally Posted by campbell8402
i am familiar with where the a pillar is but behind the a pillar is where the motor for the automatic seatbelts is located
that was my orgional plan until i made this discovery
i will try the velcro in a few diff spots and suggestion on where i could try?
not sure if this will help at all but the first pic i put up you couldnt see the auto seatbelt i was talkin about
http://i117.photobucket.com/albums/o...2/IMAG0142.jpg
also the plastic trim from the a pillar is all one piece from the a-c pillars and would be a bear to get off even if the motor wasnt right behind where id like to mount the tweeter
what would ya think about mounting it in the door right below the defrost vent for the window? would the heat effect the tweeter?
Top of your door panel, Sail panels, back in the dash, etc. tons of different places.
ok im familiar with a pillar but what is the sail panel?
I believe it's that little triangle piece on the bottom corner of the window.Quote:
Originally Posted by campbell8402
right above your door panel, the sail shaped panelQuote:
Originally Posted by campbell8402
Sail panel would be easy.
i popped it off but the bolt for the mirror is right to the panel... iwill have to play around and see what i can work out.......
maybe i could buld them out with something ?
Do a tweeter pod in the sail panel. Will allow you to aim and you dont need much depth on the threaded rod to mount with a nut.
http://www.caraudio.com/forums/advan...-examples.html