Front stage design question?

[getsumbaby]

I would like to have a really kick-a$$ front stage. I have been looking into this for a while and here is what I came up with.

This is listed per side- 2x6.5" midbass, 1x4" midrange, 1xtweet.

What is the best way to get this without totally breaking the bank? I am running the 4" so I can have a harder hitting midbass with out sacrificing my midrange. I would like to not need the 4" if possible.

Let me know what all of you who have tried this setup think?

ED

[tobz]

I would NOT use the 4" if you don't want to. It just adds complexity and $$ to the install. Just get a nice set of components and install them nicely. Personally, I run CDT-CL61's (149.99 from thezeb.com) and a Profile CA400 amp ($80 shipped from millionbuy.com). I recommend thezeb over millionbuy, but that is just from my personal experience. I installed them myself, and they sound great. I put the 6.5"s in my doors (factory location in 2000 Dodge Stratus), and the tweeters mounted onto the dash. I couldn't think of a better way to spend ~$250. It gets loud, decent midbass (the midbass will rely more on your install), and not too expensive.

Give it a shot.

T.J.

[454Casull]

What's your idea of "breaking the bank"? $300? $500? $1000?

[getsumbaby]

What's your idea of "breaking the bank"? $300? $500? $1000?

For the front seperates I would say - 300-400 would be about right. And I guess not the 4"

Ed

[Berry47]

I love my cdt hd-62cf's they sound amazing and have plenty of all of the spectrum of frequencies.