Closed Thread
Results 1 to 2 of 2

Reload Thread: Need help with changing system, comp or just speakers

  1. #1
    ap0091's Avatar
    ap0091 is offline Senior VIP Member



    Join Date
    Sep 2008
    Location
    East Texas
    Posts
    225
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Need help with changing system, comp or just speakers

    Im Looking to upgrade my current sound system
    First here is my current setup:
    Sub - Kicker CVT12 @ 400W RMS @ 2OHM
    Sub Amp - Kicker ZX400.1 @ 400W RMS @ 2OHM

    Speakers - KFC-1651S @ 25W OR SOMETHING
    Speakers AMP - MTX 4004 SPECS BELOW

    Headunit - P3000IB, outputs i think 15W to nothing, maybe tweeters later

    These are the specs of my speakers amp:
    Power Output: 50 Watts RMS x 4 channels at 4 Ohms ≤ 1% THD+N
    Signal-to-Noise Ratio: 80 dBA (reference: 1 W output)
    Additional Power Output: 100 Watts RMS x 4 channels at 2 Ohms ≤ 1% THD+N
    200 Watts RMS x 2 channels bridged at 4 Ohms ≤ 1% THD+N
    THD+N (Distortion): <0.25% (reference: 1 W output)
    Frequency Response: 20 Hz to 20 kHz (-3dB)
    Maximum Input Signal: 5V
    Maximum Sensitivity: 100mV
    http://www.mtx.com/caraudio/archive/mxaAmps/mxa4004.cfm

    First, I want to change out the speakers to something that will hit to maximize my amp, right now the doors are

    only getting 25w and thats nothing for my amp, so i need some better speakers. I have stock wiring in the speaker

    location, and my own wiring from speaker location to amp, i was thinking if i got regular speakers i could use the

    wire from amp to speakers, and i would need to get some tweeters and use the stock wiring that wuold come from the

    deck to power these..or i could just get a component system and do something with that and leave the stock wiring.
    Im not familiar with component systems, but from what i have read i guess its just a speaker and a tweeter,

    seperate, instead of being together..but since i have stock wiring and other wiring to amp wouldnt it be better to

    have regular speakers(with tweeters in them) and then another pair of tweeters?


    These are the speakers ive been looking at so tell me what you all think.

    COMPONENT SYSTEM
    Alpine SPS-600C $79.99
    80W RMS, 160W MAX
    http://www.sonicelectronix.com/item_...+SPS-600C.html

    Kicker DS650.2 $79.99 (72$ ON EBAY)
    60W RMS, 120W MAX
    http://www.sonicelectronix.com/item_...r+DS650.2.html

    Rockford Punch P1652-S $89.99
    60W RMS, 120W MAX
    http://www.sonicelectronix.com/item_...e+P1652-S.html


    REGULAR SPEAKERS
    Infinity Reference 6022i $59.99
    60W RMS, 180W MAX
    http://www.crutchfield.com/p_1086022...22i.html?tp=95

    Rockford Punch P1653 $54.99
    60W RMS, 120W MAX
    http://www.sonicelectronix.com/item_...nch+P1653.html







  2. #2
    ap0091's Avatar
    ap0091 is offline Senior VIP Member

    Threadstarter


    Join Date
    Sep 2008
    Location
    East Texas
    Posts
    225
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Need help with changing system, comp or just speakers

    Come on someone help me, I also need to know if i just run components in the front only, and then two way in the back




Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts

1e2 Forum