Closed Thread
Results 1 to 15 of 15

Reload Thread: Need S'more Kick out of my components.

  1. #1
    dirtydog's Avatar
    dirtydog is offline Member



    Join Date
    Jul 2009
    Location
    Albany, NY
    Posts
    49
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Need S'more Kick out of my components.

    As of right now I have MB Quart Q-6.5's running off a JL450/4 amp.

    The MB's have a real strong midrange and are super smooth and clear, but the bass kick is lacking?? I have read numerous times that these have a bit more kick than most, however, I listened to some Focal K2P's and those things hit me in the side for midbass. They were in a different vehicle with a diff amp and had 1200sq/ft of Dynamat Xtreme in it(Nissan xterra)His speakers were in stock locations in the doors.

    I have a 2008 Dodge Ram QuadCab
    2 layers of Dynamat on outside door skins. One layer on inside skin. Woofers are in stock door location with angle modification. Woofers are pointing upwards slightly and facing the center console arm rest(Aimed towards the center portion of the front cab)

    I have a complete set of QSD213's but they aren't going to help me being 5.25".


    Any ideas? I want something other than a MB Q-hater to respond please...lol Thanks







  2. #2
    Join Date
    May 2009
    Location
    Arlington, Tn
    Posts
    1,341
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Need S'more Kick out of my components.

    are the factory holes completely sealed off in the doors? I know on my F150. I have big gapping factory holes in mine, I deadened it and left the big holes, went back and deadened some more and sealed the holes, and it made a werld of difference. I admit that I didnt know what I was doing at first. Also, what is your HP set at?



    All girls are whores, just ask your mom how you got here.

    Feedback Thread
    http://www.caraudio.com/forums/buyer-seller-feedback/407829-blackfx4intn-feedback-thread.html

  3. #3
    dirtydog's Avatar
    dirtydog is offline Member

    Threadstarter


    Join Date
    Jul 2009
    Location
    Albany, NY
    Posts
    49
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Need S'more Kick out of my components.

    Yes. Heres a pic before I sterted to angle to the woofers. I uses sealant tape between the woofer and mounting plate I fabbed and sealant tape between mounting plate to door.



    HP is set at 63hz so the woofers can get some low bass. When i bump it up to 100hz, there's a lot that is missing.




  4. #4
    okiedokie's Avatar
    okiedokie is offline CarAudio.com Elite



    Join Date
    Aug 2008
    Location
    Pleasant Hill, CA
    Age
    91
    Posts
    1,356
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Need S'more Kick out of my components.

    your mid looks really small compared to how big your door is.




  5. #5
    Louisiana_CRX's Avatar
    Louisiana_CRX is offline dem shoes......



    Join Date
    Aug 2006
    Location
    Piney Hills of Louisiana
    Posts
    34,152
    Post Thanks / Like
    Images
    9
    Mentioned
    31 Post(s)

    Re: Need S'more Kick out of my components.

    i'd fit 6x9's in those doors if they were mine




    Current 2010 Louisiana USACi State Records :

    Trunk 0-1000.................. 151.3
    StreetBeat 2................... 145.6
    Stock 1801-up.................153.8
    SuperStock 1801-up..........154.2
    Top three in 11 out of 26 power classes and Louisiana USACi Points Leader at 465

  6. #6
    dirtydog's Avatar
    dirtydog is offline Member

    Threadstarter


    Join Date
    Jul 2009
    Location
    Albany, NY
    Posts
    49
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Need S'more Kick out of my components.

    Small?? Those are 6 3/4" q's in the doors.
    I had polk DB 6x9's but they were just alright, nothing like the MB's. 6x9's will never give the same sound as a round speaker, especially if they are coaxial which most are.
    What do you guys think about Dynaudio 8" components? Do they have kick?

    BlackFx4, how are those Pioneer PRS's?




  7. #7
    jmanpc's Avatar
    jmanpc is offline CA.com Nostalgist.



    Join Date
    Jan 2006
    Location
    Jacksonville, Fl
    Age
    26
    Posts
    17,265
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Need S'more Kick out of my components.

    More power. Those things can take 200w easy.




    2007 Red Ford Focus ZX4 SE
    - Clarion DXZ955MC -
    - MB Quart RSD216 - 2 MB Quart RWE-354 in 4 cubic feet sealed -
    - MB Quart DSC4125 - Audiopipe AP1500.1D - Optima Blue Top -

    Team High Sexage

  8. #8
    okiedokie's Avatar
    okiedokie is offline CarAudio.com Elite



    Join Date
    Aug 2008
    Location
    Pleasant Hill, CA
    Age
    91
    Posts
    1,356
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Need S'more Kick out of my components.

    what im saying is that your is so big you probably can fit an 8 or 10 in that door.
    when a speaker compamy designs a specs for a mid they are looking more into a normal size door.
    I also have large door so with most mids wont or sound right to my ears.
    yes the door size doesis just as important as deadening & aiming your mids.

    http://madisound.com/madisound_news/...aper-cone.html




  9. #9
    dirtydog's Avatar
    dirtydog is offline Member

    Threadstarter


    Join Date
    Jul 2009
    Location
    Albany, NY
    Posts
    49
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Need S'more Kick out of my components.

    The only issue is mounting depth at that point. The glass is super close. Nothing more than 3" can do. Then add a 1/2" spacer that makes 3.5" max.

    I have a Pheonix Gold 8v Line driver. i cannot even get the gains on that up to 75% without the speakers beginning to sound all distorted.

    How would i wire up the 450/4 to them? The front channels are 150w and the rear 2 are 75w. Do I give the woofers the 150w and tweets the 75w?
    I honestly not too sure on this on

    How are the Dynaudio 3way components? WIll those give me good midbass?

    I have 2-10" Infinity Perfect running off a JBL/Crown BPX1100.1 amp. Those are super clean, but are x'd at 50hz so you can't pin point the bass.

    eI appreciate all your help guys. i have been doing search after search after search....ugghhh.





  10. #10
    Join Date
    May 2009
    Location
    Arlington, Tn
    Posts
    1,341
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Need S'more Kick out of my components.

    Quote Originally Posted by dirtydog View Post
    Small?? Those are 6 3/4" q's in the doors.
    I had polk DB 6x9's but they were just alright, nothing like the MB's. 6x9's will never give the same sound as a round speaker, especially if they are coaxial which most are.
    What do you guys think about Dynaudio 8" components? Do they have kick?

    BlackFx4, how are those Pioneer PRS's?
    I absolutely love them. These components are really known for their midbass. My subs have been disconnected for over a week(waiting on new amp) and I can honestly say I've been fine without them. That feeling in your chest that you were refering to with the midbass, these put it out beautifully with only 80rms going to each side. I have the mids HPassed at 60hz with no problems or distortion. Eventually I want to get a 4 channel@100 per channel so I can send these more power. Some say the tweeters with these components are a little harsh, But I like them just fine.



    All girls are whores, just ask your mom how you got here.

    Feedback Thread
    http://www.caraudio.com/forums/buyer-seller-feedback/407829-blackfx4intn-feedback-thread.html

  11. #11
    dirtydog's Avatar
    dirtydog is offline Member

    Threadstarter


    Join Date
    Jul 2009
    Location
    Albany, NY
    Posts
    49
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Need S'more Kick out of my components.

    Tweet's can't be harsher than my Q's????....lol

    WHat are your thought on the Dynaudio 8" components? Are they too smooth or do they kick with authority?




  12. #12
    Join Date
    May 2009
    Location
    Arlington, Tn
    Posts
    1,341
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Need S'more Kick out of my components.

    Quote Originally Posted by dirtydog View Post
    Tweet's can't be harsher than my Q's????....lol

    WHat are your thought on the Dynaudio 8" components? Are they too smooth or do they kick with authority?
    Never heard them and don't know anything about them to be honest. They look nice. I saw a pair of their tweets that I considered getting. But, that's pretty much all I know about them.



    All girls are whores, just ask your mom how you got here.

    Feedback Thread
    http://www.caraudio.com/forums/buyer-seller-feedback/407829-blackfx4intn-feedback-thread.html

  13. #13
    PaulD's Avatar
    PaulD is offline self-imposed ban



    Join Date
    Apr 2008
    Location
    la la land
    Posts
    704
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Need S'more Kick out of my components.

    have you tried putting one of the mids out of phase ?



    standard disclaimer: I know nothing ..... take my advice at your own peril


    Quote Originally Posted by SRim23 View Post
    i think we're between boners at the moment

  14. #14
    dirtydog's Avatar
    dirtydog is offline Member

    Threadstarter


    Join Date
    Jul 2009
    Location
    Albany, NY
    Posts
    49
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Need S'more Kick out of my components.

    Quote Originally Posted by PaulD View Post
    have you tried putting one of the mids out of phase ?
    Yes. I'm actually right in the middle of applying a 3rd layer of Dynamat inside the doors and changing the adapter plate/mount that I currently have. I will double check polarity with a half dead AA battery just to make sure I have correct polarities as I have spliced into the factory wiring just before it goes into the door. (Chrysler has those quick disconnects to take the door off and there are no empty holes to drill through) It's temporoary until I figure out what the heck is going on.




  15. #15
    dirtydog's Avatar
    dirtydog is offline Member

    Threadstarter


    Join Date
    Jul 2009
    Location
    Albany, NY
    Posts
    49
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Need S'more Kick out of my components.

    So i removed the woofers and put in my old POLK DB 6x9's and OMFG those things F'en BUMP! Nothing close to Q's as far as Clarity, but I did notice that my 4 channel RCA's were reversed from front to rear at my line driver...hmmmm????? It's too late today to swap everything back out again to make sure that wasn't a problem since i have pulled those offf several times trying to decipher if I had a pinched wire for the Pass side as the ouput seemed low. I concluded it was imaging that was making it seem like that since I have just my F90bt HU for EQ settings(blows)
    Cuz' I didn't hook up my Pioneer 9200 yet.


    ANyways. that's my update.




Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts

1e2 Forum