Anyway to trick a speaker into...

[Frankensuby]

...being a different Ohm? I know how to do it on a DVC subwoofer, but is there anyway to do it on an SVC speaker? Like, drop a 4 Ohm speaker to a 2Ohm load?

[BeAlLsTaR13]

yeah, add another 4 ohm svc sub to it

[jco1385]

slap that bish and tell it what to do

[audioarsonal]

You can add a 4 ohm resistor.But I would only use that for mids/highs.

[schrummy]

yep get a second svc 4 speaker and wire them in parallel

[Frankensuby]

So, if I had 2 6x9's I could trick them into running a lower ohm (both would be 4 Ohm) by running a setup like I would with a 4Ohm DVC subwoofer?

[MasterOfAllBass]

id give it a quick **** punch!

[tRiGgEr]

So, if I had 2 6x9's I could trick them into running a lower ohm (both would be 4 Ohm) by running a setup like I would with a 4Ohm DVC subwoofer?

Yeah. Two 4 ohm speakers can be wired to a final 2 or 8 ohm load.

Check out a woofer wiring wizard.

[audioarsonal]

If you do that you will lose your left right fad capabilities.

[grimreper912003]

There wouldnt be a left and right anymore though. Just remember that.

^^^beat me to it.

[JimJ]

If you're trying to get more power that way, it's not worth it.

[Frankensuby]

So, like this but with 2 separate speakers:

[jmanpc]

Wire in a 4 ohm resistor.

The only catch is, the resistor will get half the power. So you're back to square one.

Bottom line, you can't.

[Frankensuby]

If you're trying to get more power that way, it's not worth it.

Well, I'm rigging them to work with a Bose system that uses 2 Ohm speakers It's only a temporary fix until he (my friend I'm working on his car audio for; Blown rear paper speakers) gets the money together for the front components and a HU to replace the craptastic Bose.

[audioarsonal]

Just buy some cheap tweeters and hook them up.They'll drop your ohm and give you some added sound.