Closed Thread
Results 1 to 3 of 3

Reload Thread: Replace 1 Kicker CVR ported with 3 Alumapro MX 10's sealed?

  1. #1
    headless's Avatar
    headless is offline CarAudio.com Elite



    Join Date
    Feb 2006
    Location
    Florida (Tallahassee)
    Posts
    1,292
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Replace 1 Kicker CVR ported with 3 Alumapro MX 10's sealed?

    What do you think? Replace 1 Kicker CVR 10 with 3 alumapro MX 10's? I'll be putting about twice as much power to 3 times the cone area. Should I be able to exceed the CVR's output? I've been able to find very little information on the alumapro's but from what I can find they are supposed to be good SQ drivers. My objective is not only to improve the SQ but also boost output some. Will be going from ~300w RMS to the CVR to ~800-1k RMS to 3 alumapro 10's sealed. Does anyone have experience with the alumapro MX's?

    Edit: shitballz, meant this to be in Subwoofer forum. Can a mod move this sucker over by any chance?
    Wish i could delete it myself



    Eclipse CD7000 - RioCar Empeg 3
    Rainbow Powerline CS 275.27 / Arc Audio 4150 XXK (Woofers) - Arc Audio 2100 XXK (Tweeters)
    Rainbow Vanadium 12 x2 / Arc Audio 1500 XXK
    Quote Originally Posted by TEAM HAMMER
    Your so full of Crap! The last place you want a Midbass or Sub is in front of you Retard Whens the last time you seen a 12in+ sub up front?
    Quote Originally Posted by bdawson72
    Technically, bigger wire has more resistance.




  2. #2
    galacticmonkey's Avatar
    galacticmonkey is offline Wants a button like that.



    Join Date
    Sep 2006
    Location
    Tampa, FL
    Posts
    7,675
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Replace 1 Kicker CVR ported with 3 Alumapro MX 10's sealed?

    Why not? With 3x the cone area and double the power it should be alot louder.




  3. #3
    headless's Avatar
    headless is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Feb 2006
    Location
    Florida (Tallahassee)
    Posts
    1,292
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Replace 1 Kicker CVR ported with 3 Alumapro MX 10's sealed?

    Well, it's going from a ported box to sealed, and i don't know the xmax/etc. of the alumapro drivers...mainly looking for anyone who has run these subs before to see what kind of output to expect...



    Eclipse CD7000 - RioCar Empeg 3
    Rainbow Powerline CS 275.27 / Arc Audio 4150 XXK (Woofers) - Arc Audio 2100 XXK (Tweeters)
    Rainbow Vanadium 12 x2 / Arc Audio 1500 XXK
    Quote Originally Posted by TEAM HAMMER
    Your so full of Crap! The last place you want a Midbass or Sub is in front of you Retard Whens the last time you seen a 12in+ sub up front?
    Quote Originally Posted by bdawson72
    Technically, bigger wire has more resistance.

Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts

1e2 Forum