the papers give recomendations for a sealed and ported box. should i not run these IB? i plan to just put them in my doors.
the papers give recomendations for a sealed and ported box. should i not run these IB? i plan to just put them in my doors.
comps:MB QUART PREMIUM PCE 213
comp amp: NEED AN AMP!!
sub: rehc 15
sub amp:Crystal CAD 600 .2t
REF:
bought from-silver02italy,CrazedCat,sandbags,blue200sx,sundown z,exige,nismos14,Ridinhi
sold to: pike110,VolvoSlapper,TeeBee,IbSlamn,iwannatt,Kingl owlife
Traded with- QBenjamin,snfsh79077,
did buisness with hemi=22s. good guy,
????=j_alexander
up
comps:MB QUART PREMIUM PCE 213
comp amp: NEED AN AMP!!
sub: rehc 15
sub amp:Crystal CAD 600 .2t
REF:
bought from-silver02italy,CrazedCat,sandbags,blue200sx,sundown z,exige,nismos14,Ridinhi
sold to: pike110,VolvoSlapper,TeeBee,IbSlamn,iwannatt,Kingl owlife
Traded with- QBenjamin,snfsh79077,
did buisness with hemi=22s. good guy,
????=j_alexander
Do you have ES6 or ES-06.Either one will work fine in the doors.It will be much better if you seal and deaden your doors.The ES-06 has a stiffer cone and a lot more x-max so it has a mellower midrange but better midbass.I have both but I can't decide which one I like better-I should probably use the 06 for midbass and the ES6 for midrange.Where did you get them,how much ?
i bought them from cdt. got a good deal on em". i dont really know what series.
comps:MB QUART PREMIUM PCE 213
comp amp: NEED AN AMP!!
sub: rehc 15
sub amp:Crystal CAD 600 .2t
REF:
bought from-silver02italy,CrazedCat,sandbags,blue200sx,sundown z,exige,nismos14,Ridinhi
sold to: pike110,VolvoSlapper,TeeBee,IbSlamn,iwannatt,Kingl owlife
Traded with- QBenjamin,snfsh79077,
did buisness with hemi=22s. good guy,
????=j_alexander
The ES6 will be yellow or orange frame with a bubble dust cap.The ES06 will have a flat to slightly inverted dust cap probably will say ES in it.I got to leave now -wife's waiting to going shopping I'll be back later.
i got es-6's
comps:MB QUART PREMIUM PCE 213
comp amp: NEED AN AMP!!
sub: rehc 15
sub amp:Crystal CAD 600 .2t
REF:
bought from-silver02italy,CrazedCat,sandbags,blue200sx,sundown z,exige,nismos14,Ridinhi
sold to: pike110,VolvoSlapper,TeeBee,IbSlamn,iwannatt,Kingl owlife
Traded with- QBenjamin,snfsh79077,
did buisness with hemi=22s. good guy,
????=j_alexander

ES-6s will be fine IB mounted. Seal and deaden the door for best results in IB. If you can build a small sealed pod for them you can get slightly better power handling. I replaced my older ES-6s with ES-06+s with great results. I did have sealed pods for both.
Artificial Intelligence is no match for Natural Stupidity.
Never underestimate the power of stupid people in large numbers.
Life's tough...it's even tougher when you're stupid.
You didn't buy them from CDTYou bought them from me. Considering the deal that you got on them (a ridiculous one I might say)...credit must go where it's due lol.
You have ES-6's which will perform fine in an IB install. As always, thoroughly deadening your doors is recommended. CDT simply puts the ported and sealed recommendations on their spec sheets in case the user would want to run them that way.
Your receipt is on its way shortlyCheck your email.
comps:MB QUART PREMIUM PCE 213
comp amp: NEED AN AMP!!
sub: rehc 15
sub amp:Crystal CAD 600 .2t
REF:
bought from-silver02italy,CrazedCat,sandbags,blue200sx,sundown z,exige,nismos14,Ridinhi
sold to: pike110,VolvoSlapper,TeeBee,IbSlamn,iwannatt,Kingl owlife
Traded with- QBenjamin,snfsh79077,
did buisness with hemi=22s. good guy,
????=j_alexander
Bookmarks