My first set of components

[Techchild]

The sonics website says they have a Frequency Response down to 25HZ. I personally think that is not right. Should I cross them around 60hz with my subs?
And how do I adjust the crossover?

[tcguy85]

cross the comps at between 60-100hz. depends on how loud you listen, and what kind of music you listen to. what do you have for a HU and amps? we can't tell you how to set you your crossovers w/o knowing what you have.

what comps are they as well?

[Techchild]

Components are poineer revs 6.5 amp is a crunch pzi400.1 subs are poineer premium 10" champonship series.

[dragnix]

doesn't comps come with their own x-over?

[tcguy85]

what is going to power the comps? what hu do you have as well?

[Techchild]

I'm guessing I worded this wrong.
What should I cross my subs with my mids at?

[Techchild]

what is going to power the comps? what hu do you have as well?

crunch pzi100.4 lol I wrote it down wrong the first time

[tcguy85]

I'm guessing I worded this wrong.
What should I cross my subs with my mids at?

cross around 60-100hz. depends on a lot of things.

[tcguy85]

crunch pzi100.4 lol I wrote it down wrong the first time

well you can use the crossovers on the amps, or if the hu has crossovers you can do it there instead.

[dragnix]

i say do 80 or lower, a sub shouldn't play higher IMHO

[Techchild]

cross around 60-100hz. depends on a lot of things.

oh ok so I should just see were I like it. between 60-100hz I had my mids at 100hz and my subs at 80hz before but now it's has more quality parts and I whanted a better sound.

[tcguy85]

i say do 80 or lower, a sub shouldn't play higher IMHO

try the sub and mids both at 80, or try the sub at 63 sub at 80. a small underlap is sometimes good.

edit: i say 63 cause thats one of the points my hu allows. so sorry if 63 sounds odd.