re xxx 3-way set-up ?'s

[born into this]

I wanna finally use my xxx mids... I was thinking bout doing a 3-way set up and using them for the bottom end, possibly just 2 way. need some help on matching them up with the right tweets (and mids if going 3 way). I looked up old posts already and was hoping there was some new info or experiences by some of you guys with them! not to mention I havent used an active set up in I dont know how long??? which ones would be good for a 2-3 way set up like im talking bout???any help would be great!!!

[tRiGgEr]

Well if you want to run a 2way setup. You will need a tweeter that can pick up around 2500hz. Ideally you want to keep the XXX6.5's below 1500hz to retain a smooth responce from them.

If you decide to run a 3way setup. Really any capable speakers will do. You will just need the right processing to do it correctly.

[born into this]

Well if you want to run a 2way setup. You will need a tweeter that can pick up around 2500hz. Ideally you want to keep the XXX6.5's below 1500hz to retain a smooth responce from them.

If you decide to run a 3way setup. Really any capable speakers will do. You will just need the right processing to do it correctly.

any suggestions for processing on the 3 way?

[Tempe]

Well if you want to run a 2way setup. You will need a tweeter that can pick up around 2500hz. Ideally you want to keep the XXX6.5's below 1500hz to retain a smooth responce from them.

• anyone with XXX care to do some measurements/reviews?
• Resonant Engineering XXX 7"
• CDT 07 RE XXX and Seas G18RNX/P Review

T

[born into this]

thanks