I am thinking about building my own 3 way comopnent set. The problem is I am pretty darn new to this......
This is what I am thinking......
DAYTON DC28F-8 1-1/8" SILK DOME TWEETER
DAYTON RS52AN-8 2" DOME MIDRANGE
DAYTON RS225-4 8" REFERENCE SERIES WOOFER 4 OHM
DAYTON XO3W-500/4K 3-WAY CROSSOVER 500/4,000 Hz
In theory this should all work pretty well together even though the tweeter and the midrange are 8 ohm. I am pretty sure a 100 watts at 4 ohms going into the crossover should be enought to power the 3 way component system. I am also planning on completely remaking the fron door panels on my 04 F150. At this point in time I think this is the easist way of making a quality sealed enclosure big enough in each door for the 8" woofer. Probably make everything out of MDF and plywood.
The other possible substitution is a Fostex FT7RP ribbon for the tweeter.
How does this sound to you guys? Never made my own components so any help would be greatly appreciated.