Lithia Springs GA, March 29th

[DBDesignsElite]

Hell i wasn't even going to go... Didnt have the 10's my 15's werent here on time... The only thing i had here was a raggady MOJO 12 i threw in a older Fart Box i did a 50.1 on TL back a while back on..

Well the **** MOJO didnt like the **** Box/ port area so i had to take a some length away about 30 mins before we had to be there... Ran My saz 3000d's on it @ 4 ohms each and pulled a 48 flat... about 2.5 DB's high then last years WR holder... Still ******..

Doug Killed it with a 151.9!!!!!! Almost a 52 Legal!!!! Single 15 AQ D3 on his new AQ2200's We both should have ran the other classes.. lol.. **** RAIN!!! lol..

Grass i dont know what he did or dont remeber but he snatched up a 1st also..

All and all had some fun... Looking forward to the next one.. You better be there LOL

[skadude016]

Hell i wasn't even going to go... Didnt have the 10's my 15's werent here on time... The only thing i had here was a raggady MOJO 12 i threw in a older Fart Box i did a 50.1 on TL back a while back on..

Well the **** MOJO didnt like the **** Box/ port area so i had to take a some length away about 30 mins before we had to be there... Ran My saz 3000d's on it @ 4 ohms each and pulled a 48 flat... about 2.5 DB's high then last years WR holder... Still ******..

Doug Killed it with a 151.9!!!!!! Almost a 52 Legal!!!! Single 15 AQ D3 on his new AQ2200's We both should have ran the other classes.. lol.. **** RAIN!!! lol..

Grass i dont know what he did or dont remeber but he snatched up a 1st also..

All and all had some fun... Looking forward to the next one.. You better be there LOL

not bad numbers! Ya I will be there next time for sure! I gotta hear your setup

[grassroots]

155.9 renegade... i was just kinda guessing my frequency too... first one was a 45hz which got me to 155.xx then 50hz made it jump a few tenths to 155.9...

i really want to play around on a TL...

[skadude016]

155.9 renegade... i was just kinda guessing my frequency too... first one was a 45hz which got me to 155.xx then 50hz made it jump a few tenths to 155.9...

i really want to play around on a TL...

I have a meter thats only like 1/10th - 2/10th's off a TL i tested it on. and that was 1/10th - 2/10ths lower than the TL.

If you wanna do some testing I can help ya out!

[skadude016]

155.9 renegade... i was just kinda guessing my frequency too... first one was a 45hz which got me to 155.xx then 50hz made it jump a few tenths to 155.9...

i really want to play around on a TL...

by the way good numbers. Im searching for a 160 renegade. shall find out the 20th

[DBDesignsElite]

Yea Grass was first in line out of us all.. Doug then me.. Hell i didnt even know him until the trophy time. Even though it was raining i had fun.. At least i made it J lol.. I threw the setup together by 6:00 after all that and still made it..

Good Numbers grass i use to run the MT's i wish i could have gotten a demo.. Makes me wish i had kept the 10's in there a lil bit longer.

[grassroots]

should have asked i would have cranked it up for ya man... you gonna be at the show the 20th?

I have a meter thats only like 1/10th - 2/10th's off a TL i tested it on. and that was 1/10th - 2/10ths lower than the TL.

If you wanna do some testing I can help ya out!

nice, i might have to take you up on that... and 160? daaamn i want a demo...

[skadude016]

should have asked i would have cranked it up for ya man... you gonna be at the show the 20th?



nice, i might have to take you up on that... and 160? daaamn i want a demo...

hopefully i can do a 160 on his mic. the way my testing has been showing it should be in the area of that. and ya man let me know ill be glad to help ya out with testing. or we could even meet up before the show and do some testing. I just hope my work lets me off. I need to call Jim and see when the meet is at on the 20th

[DBDesignsElite]

should have asked i would have cranked it up for ya man... you gonna be at the show the 20th?



nice, i might have to take you up on that... and 160? daaamn i want a demo...

Yea im going to try to be there... I hope i get the build done on time.. This time ill come with something i can actually demo..