These have been a long time coming, and a good while until everything was set to get these ready to go. Due to not being a simple slap a logo on an off the shelf item and non-standard design, there were lots of part delays and design tweaks, but finally production is wrapping up. They will be on the way to us shortly.
Ok, so these are a 2" copper coil, shorting ring, solid pole, phase plug, underhung design. In final testing, they are a very very clean, warm sound. They were right at home in an IB rig that Neal Munro helped out on big time, so dropping into an average car door is excellent.
The Evil6.5's have push terminals that are good for 10 gauge wire. Nomex spiders, so they will able take the same long term abuse that the SSA subs are known for. Also, the glass fiber cones performed a little better than the poly cones in testing.
I will be setting these at 120-150rms, available in both 4 & 8ohm.
Specs are below, on the bottom right. Follow the green slope for the production model. I had put together a slightly different prototype model to see what combination of aspects were the best performing for our goals, so ignore the purple slope and specs on the left.
Pricing is not announced yet, but they will be well priced and ship same or next business day.