+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 18

Reload Thread: New SSA Dcon almost ready...

  1. #1
    denim's Avatar
    denim is offline SSAudio.com



    Join Date
    Oct 2002
    Location
    SSA HQ East
    Age
    37
    Posts
    28,192
    Post Thanks / Like
    Images
    15
    Mentioned
    90 Post(s)

    New SSA Dcon almost ready...

    Photos are done, specs and enclosure info will be up soon. Below are shots of the new Dcon 10, it is a shallow mount. It is still a great SQ option that blends really well, and can have authoritative output on modest power. The newer design has greater cooling and more motor force along with a little more power handling and enclosure flexibility than the original Dcon.

    Sub Woofers - SoundSolutionsAudio - DCON - SSA STORE











    CarAudio.com mod(original)

  2. Likes SounDrive liked this post



  3. #2
    Freeman's Avatar
    Freeman is offline I TrY



    Join Date
    May 2013
    Location
    Watertown, SD
    Posts
    834
    Post Thanks / Like
    Mentioned
    3 Post(s)

    Re: New SSA Dcon almost ready...

    looks śexy




    1986 Nissan hardbody
    Hu:Kenwood Kmm-100u
    front:1 Cheep Kenwood speaker.
    Rear:the 3in of room behind my seat where my amp sits
    Sub:soon
    Amp:polk pa330
    Wiring:1/0 knu kca to 4gauge distribution block and 1/0 kca big 3

  4. Thanks denim thanked for this post
    Likes denim liked this post
  5. #3
    globalminds_ent's Avatar
    globalminds_ent is offline CarAudio.com Elite



    Join Date
    Dec 2011
    Location
    oxford ms
    Posts
    1,172
    Post Thanks / Like
    Mentioned
    2 Post(s)

    Re: New SSA Dcon almost ready...

    Ssa has to have some of best looking subs, with performance to match, love how the motor is extended like that.




  6. Thanks denim thanked for this post
    Likes denim liked this post
  7. #4
    denim's Avatar
    denim is offline SSAudio.com

    Threadstarter


    Join Date
    Oct 2002
    Location
    SSA HQ East
    Age
    37
    Posts
    28,192
    Post Thanks / Like
    Images
    15
    Mentioned
    90 Post(s)

    Re: New SSA Dcon almost ready...

    Quote Originally Posted by Freeman View Post
    looks śexy





    CarAudio.com mod(original)

  8. #5
    denim's Avatar
    denim is offline SSAudio.com

    Threadstarter


    Join Date
    Oct 2002
    Location
    SSA HQ East
    Age
    37
    Posts
    28,192
    Post Thanks / Like
    Images
    15
    Mentioned
    90 Post(s)

    Re: New SSA Dcon almost ready...

    Quote Originally Posted by globalminds_ent View Post
    Ssa has to have some of best looking subs, with performance to match, love how the motor is extended like that.
    Why thank you.





    CarAudio.com mod(original)

  9. #6
    St.Zu's Avatar
    St.Zu is offline Junior Member



    Join Date
    Mar 2014
    Location
    Dallas
    Posts
    1
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: New SSA Dcon almost ready...

    Any idea on depth?




  10. #7
    2002XLT's Avatar
    2002XLT is online now Thats right bishes...



    Join Date
    Jun 2007
    Location
    H-Town, TX
    Posts
    6,973
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: New SSA Dcon almost ready...

    Have any info yet? Definitely interested.



    Refs-
    http://forums.explorerx.com/index.php?showtopic=11984
    http://www.caraudio.com/forum/showthread.php?t=245865 http://www.caraudio.com/forum/showth...59#post3482859
    Ebay Feedback- http://myworld.ebay.com/lilchard1969/

    Vehicle-
    2002 Explorer XLT
    R1 Concepts Cross drilled/slotted rotors w/ performance pads, K&N FIPK Intake, Removed roof racks, Debadged, Tinted tails, Clear Corners, Upper and lower Billet Grilles,5% Tint all the way around

    Stereo- All stock.

  11. #8
    SounDrive's Avatar
    SounDrive is online now SounDrive RCA



    Join Date
    Apr 2013
    Location
    Lebanon & Knoxville, TN
    Posts
    1,919
    Post Thanks / Like
    Mentioned
    2 Post(s)

    Re: New SSA Dcon almost ready...

    Quote Originally Posted by 2002XLT View Post
    Have any info yet? Definitely interested.
    Same here. I may have a couple of installs coming up soon that this would be perfect for.



    Owner, SounDrive Custom RCAs (and other cables)

    Find us on Facebook!

  12. #9
    denim's Avatar
    denim is offline SSAudio.com

    Threadstarter


    Join Date
    Oct 2002
    Location
    SSA HQ East
    Age
    37
    Posts
    28,192
    Post Thanks / Like
    Images
    15
    Mentioned
    90 Post(s)

    Re: New SSA Dcon almost ready...

    Here are the PRE-PRODUCTION specs:

    DCON10

    DCR 7.8 Ohms (D4 wired in series) 3.4 (S4 coil)
    FS 29.6 Hz
    QMS 4.51
    Qes .31
    Qts .29
    Mms 111g
    Vas 35.0 l
    SD 310 cm^2
    BL 22.8 15.05 (S4 coil)
    SPL 86.5 1W/1m


    DCON12

    DCR 7.8 Ohms (D4 wired in series) 3.4 (S4 coil)
    FS 28.1 Hz
    QMS 4.98
    Qes .34
    Qts .32
    Mms 136g
    Vas 78.1 l
    SD 480 cm^2
    BL 22.8 15.05 (S4 coil)
    SPL 89.2 1W/1m


    DCON15

    DCR 7.8 Ohms (D4 wired in series) 3.4 (S4 coil)
    FS 32.5 Hz
    QMS 5.66
    Qes .45
    Qts .42
    Mms 148g
    Vas 149.2 l
    SD 810 cm^2
    BL 22.8 15.05 (S4 coil)
    SPL 92.4 1W/1m





    CarAudio.com mod(original)

  13. #10
    2002XLT's Avatar
    2002XLT is online now Thats right bishes...



    Join Date
    Jun 2007
    Location
    H-Town, TX
    Posts
    6,973
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: New SSA Dcon almost ready...

    Mounting depth?



    Refs-
    http://forums.explorerx.com/index.php?showtopic=11984
    http://www.caraudio.com/forum/showthread.php?t=245865 http://www.caraudio.com/forum/showth...59#post3482859
    Ebay Feedback- http://myworld.ebay.com/lilchard1969/

    Vehicle-
    2002 Explorer XLT
    R1 Concepts Cross drilled/slotted rotors w/ performance pads, K&N FIPK Intake, Removed roof racks, Debadged, Tinted tails, Clear Corners, Upper and lower Billet Grilles,5% Tint all the way around

    Stereo- All stock.

  14. #11
    denim's Avatar
    denim is offline SSAudio.com

    Threadstarter


    Join Date
    Oct 2002
    Location
    SSA HQ East
    Age
    37
    Posts
    28,192
    Post Thanks / Like
    Images
    15
    Mentioned
    90 Post(s)

    Re: New SSA Dcon almost ready...

    Quote Originally Posted by 2002XLT View Post
    Mounting depth?
    I post them up soon, forgot to grab them in the craziness lately.





    CarAudio.com mod(original)

  15. #12
    2002XLT's Avatar
    2002XLT is online now Thats right bishes...



    Join Date
    Jun 2007
    Location
    H-Town, TX
    Posts
    6,973
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: New SSA Dcon almost ready...

    No problem. I understand. Also if you could tell me how much sealed or ported air space they need. And what you would safely consider a daily rms range. If they will fit id like to put 2 10s in my truck. Thanks.




  16. #13
    denim's Avatar
    denim is offline SSAudio.com

    Threadstarter


    Join Date
    Oct 2002
    Location
    SSA HQ East
    Age
    37
    Posts
    28,192
    Post Thanks / Like
    Images
    15
    Mentioned
    90 Post(s)

    Re: New SSA Dcon almost ready...

    Quote Originally Posted by 2002XLT View Post
    No problem. I understand. Also if you could tell me how much sealed or ported air space they need. And what you would safely consider a daily rms range. If they will fit id like to put 2 10s in my truck. Thanks.
    Enclosure wise, they are not far off from a mix between the original Dcon and the Gcon. Not knowing listening habits or power, for a pair of 10's sealed, I would do around 1.5 cubes with maybe a pound or so of polyfill, and ported I would aim for 2.2 cubes tuned in the 31hz range.

    Power wise, 400 is plenty. I pushed it pretty far past that, but that was more for abuse testing. So going over 500 is not really needed, 300-400 is plenty and a nice sweet spot.





    CarAudio.com mod(original)

  17. #14
    2002XLT's Avatar
    2002XLT is online now Thats right bishes...



    Join Date
    Jun 2007
    Location
    H-Town, TX
    Posts
    6,973
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: New SSA Dcon almost ready...

    Do you think they would be ok with 1.05 sealed? That's about how much room I will have under the seats. Also I've got about 6" mounting depth to work with. Do-able?




  18. #15
    denim's Avatar
    denim is offline SSAudio.com

    Threadstarter


    Join Date
    Oct 2002
    Location
    SSA HQ East
    Age
    37
    Posts
    28,192
    Post Thanks / Like
    Images
    15
    Mentioned
    90 Post(s)

    Re: New SSA Dcon almost ready...

    Quote Originally Posted by 2002XLT View Post
    Do you think they would be ok with 1.05 sealed? That's about how much room I will have under the seats. Also I've got about 6" mounting depth to work with. Do-able?
    That is tight, but could work with some polyfill/acoustastuff. Is that mounting depth allowing for space in front of the cone?





    CarAudio.com mod(original)

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. New SSA Dcon 15
    By RAM_Designs in forum General Discussion
    Replies: 19
    Last Post: 07-01-2011, 02:56 PM
  2. SSA Dcon's are ready to ship!!
    By soundsolutions in forum Subwoofers
    Replies: 14
    Last Post: 01-06-2009, 03:57 PM
  3. New system almost ready... PICS
    By Pitchblack98 in forum General Discussion
    Replies: 15
    Last Post: 08-23-2006, 01:27 PM
  4. New system Almost ready to start installing
    By primitivefears in forum General Discussion
    Replies: 1
    Last Post: 08-27-2004, 03:53 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may not post attachments
  • You may edit your posts

1e2 Forum