Going to be doing a bit of upgrades to the truck which include...
New JVC KW-NT700J Navi unit
1 15" ZCON (on 4kw RMS)
1 15" Custom Enclosure built by Ricki30 from Alerion Enclosures, Tucson AZ
Completely custom fabbed steel false floor skeleton for the back end.
I plan on mounting all my amps under the false floor, leaving myself a blank slate above it to install various boxes for testing etc...
I will still be using my MTX TE4000Ds & TE1004s
---------- Post added at 06:26 PM ---------- Previous post was at 06:26 PM ----------
Ok, here is what we are working with...
My current set up
My goal is to have a awesome demo vehicle and reclaim half of my truck as I have a major need for it with my new family.
All the amps are going to be mounted below the floor (instead of on top of the floor), and the enclosure will take up the right/left side of the truck, leaving half of the trunk space for strollers or groceries
[quote name='stefanhinote' timestamp='1331662068' post='890127']
Nice equipment to start off with. No more jet pack. :P
I have really enjoyed having the XCON in a sealed box, as you know Stephan, that is a departure from the norm. for me.
Here is a mock up of the measurements I am working with. Dylan is going to design me a killer enclosure from this point.