Search:

Type: Posts; User: nkrell11

Page 1 of 2 1 2

Search: Search took 0.02 seconds.

  1. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    Back in the game anybody want one? I have some time on my hands this week and next.
  2. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    Well my computer is still down bit when it gets to be working again I will let you know.
  3. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    Currently my computer is inoperable so I don't know how long it will be until I can get back to these, I'm dead in the water :(
  4. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    momax_powers; I looked into your design and I've decided that whatever I came up with wouldn't perform well due to your constraints, a single slot port with those dimensions would do well but 2 slots...
  5. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    Sorry guys I had a really busy weekend and didn't get into any designs I will get to them as soon as I can.
  6. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    Idk hard to tell probably the larger one on low power but for more power I would do the smaller one I think it would be a toss up otherwise.
  7. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    AQ 8's 2.92ft^3 net 35.5Hz 14.98in^2/ft of port area.
    http://i1271.photobucket.com/albums/jj631/nkrell11/chive%20ish/AQ8s292ft3355Hz1498in2ft_zps0be053c7.jpg
  8. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    I have it done I just need to find some wifi or put it on my phone and text it to you.
  9. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    Well if you make it 2 inches deeper I can get it up to 2.9 net with a 35.5hz tune and a decent amount of port area let me know and I can draw it up for you tomorrow.

    Never did get to it but I...
  10. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    I can look into what adding 2 inches would do for volume tomorrow and if it gets close to 3 cubes I'll draw it up for you or if not I'll let you know what it nets.
  11. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    If you'd like I could re-do it for 3 cubes but that sounds like quite a bit to me that's like 1 cube per 8.
  12. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    I think I know what you're referring to concerning the 4 hifonics 12's in the trunk. I guess I was trying to be polite I don't like sounding like one of those overbearing assholes who say everything...
  13. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    For volumes on some of the enclosures yes if someone wanted a different volume then I design what they want, I don't have a fancy modeling software or some magic pixie dust for designs. Am I expected...
  14. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    Well the box would most likely need to be totally reconfigured as the tuning and everything would be affected by the change I just chose the middle recommended volume for 3 8's from the aq website. A...
  15. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    No but I could tonight.
  16. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    alec14; AQ SDC 2.0 8's 2.5ft^3 Net 35.23Hz 15in^2/ft of port area.
    http://i1271.photobucket.com/albums/jj631/nkrell11/chive%20ish/AQSDC208s25ft33523Hz15in2ft_zps5fd0742a.jpg ...
  17. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    Doesn't surprise me that much the constraints that were given to me didn't leave many options a slot port would have been better but I did what he asked and with the power that he had the larger...
  18. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    I have one To do for a single ia dp but I think I can get yours in tomorrow as well. Did you have a tune in mind I know most sq/aq subs are supposed to have higher tunings like 35-40hz don't know if...
  19. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    I have one To do for a single ia dp but I think I can get yours in tomorrow as well. Did you have a tune in mind I know most sq/aq subs are supposed to have higher tunings like 35-40hz don't know if...
  20. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    Never heard a sub up port up in a trunk but it might work. I have another question though I don't think you need chambers I mean if one fails you should be able to tell I mean you'd either be able to...
  21. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    I have one To do for a single ia dp but I think I can get yours in tomorrow as well. Did you have a tune in mind I know most sq/aq subs are supposed to have higher tunings like 35-40hz don't know if...
  22. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    Couple other enclosures that I've designed since getting back to doing them.

    Single box for ZV3 10 1.24ft^3 net 15.07in^2/ft port area 33.4Hz...
  23. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    Never heard a sub up port up in a trunk but it might work. I have another question though I don't think you need chambers I mean if one fails you should be able to tell I mean you'd either be able to...
  24. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    I can give you my best technical description as I understand it which hopefully helps. So say you have two ports in your box each one facing a wheel well (I realize you want to use one in each...
  25. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    What if it was to be two separate chambers rather than 4?
  26. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    Nutdawg651;

    4 SA-12's 6.05ft^3 35Hz 9.35in^2/ft of port area 14in Aero's. You'd need to play with the woofer placement but this should work....
  27. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    See the problem with porting each way is you're likely to have some major cancellation issues and it would probably sound awful. I'll tag you Friday when I upload the similar one and we can go from...
  28. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    Wait I'm confused you want me to draw a sealed 4 chambered box that is 8ft^3 net that you plan on porting later with what I assume to be a 4 inch aero coming from each chamber? However what I think...
  29. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    Alright that's fine also if you'd be so kind as to include the volume you had in mind for net total an the displacement of the subs and what you had in mind for single or double baffle id appreciate...
  30. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    Alright hit me with it I can probably draw it tonight or tomorrow but I won't be able I upload it from my computer until Friday.
  31. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    Well back when I started this thread used to use my razr as a hotspot and then I accidentally broke it when picking up a table saw, now I have an iPhone which I hate and doesn't make hotspots. I felt...
  32. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    To be honest after I got my laptop charger I have been way too busy changing schools, doing my own build, moving out of my apartment that i really haven't had time I'm really hoping my life slows...
  33. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    Well ordered a new charger so I hope to be back at it soon.
  34. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    It probably would if the link would work on my phone :( I'll try and look at it at work or something.
  35. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    Well guys I'm really sorry to say this but you're going to have to wait longer our seek help elsewhere the charger for my MacBook pro sorted out and died on me do I can't use sketchup, and I can only...
  36. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    Aww **** I must have misread somewhere anyhow let me run the dims through torres when I get home and get you the final enclosure specs.
  37. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    Camarillo ;
    Enclosure for 2 Mmats juggernaut 15's 8.25ft^3 33Hz 15.5in^2/ft port.
    As a side note you could potentially just use a normal 45 in that port I just felt that the larger one would...
  38. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    Sorry guys I've had a busy week and high gas prices have been keeping me at home I'll try to get busy this weekend.
  39. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    @Camarillo @Boomsday
    Got your enclosures drawn up today I'll try and get them up tomorrow.


    Not to sound like a mean person but would you please copy and paste or retype your request in this...
  40. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    Sorry I haven't gotten back to yours yet I think I'll be able to get to you tomorrow as well.
  41. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    I've seen it done before actually the possibility just slipped my mind I'll look into it since I don't see any reason why it wouldn't work.
  42. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    Alright so it's looking like 47w x 31h x 47d give or take an inch on each but it shouldn't take that much room for 2 15's I'll try and get yours done tomorrow since you've been waiting a while.
  43. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    @autobotguy here is your design and cutsheet I forgot to draw in the 45's but I', guessing they'll be an 1.5-2 inches wide.

    Skar VVX 10 1.5ft^3 33Hz 14.93in^2/ft...
  44. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    I have yours finished after running the dimensions of your last box through torres your box was under a foot cubed after port and subwoofer displacements so that could easily explain your lack of...
  45. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    @raptor727 I had one drawn up before your last reply it was the only one that I've managed to do lately everyone else please bear with me I'll try and get some done today since it looks like it's...
  46. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    double post
  47. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    I'm having conceptual problems or I'm just brain dead or something tonight so it hasn't been very productive I apologize hopefully I can make more progress tomorrow.


    Tbh I don't think you have...
  48. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    No worries I haz unlimited data.


    So basically sq tuned low? What is this going in I'm guessing SUV but the height makes me think it could be an enormous trunk.


    Yeah I will upload it and...
  49. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    @Reactions @raptor727 @Shroomic your enclosure designs are drawn up this probably isn't how you tag people but if not hopefully someone can explain how to do it to me I would appreciate it. As for...
  50. Re: nkrell11's Free Enclosure Designs & Cut Sheet To Whoever Wants One

    Alright unfortunately your link didn't provide me with any helpful dimensions so if you could bust out a tape measure and get me some dimensions that would be awesome. Thinking sub up port back...
Results 1 to 50 of 56
Page 1 of 2 1 2
1e2 Forum