Closed Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 20

Reload Thread: Rolls Royce Tray Tables/Monitor Brackets

  1. #1
    dangonay's Avatar
    dangonay is offline Junior Member



    Join Date
    Jan 2014
    Location
    Vancouver
    Posts
    6
    Post Thanks / Like
    Feedback Score
    0
    Mentioned
    0 Post(s)

    Rolls Royce Tray Tables/Monitor Brackets

    These are the bare brackets from a RR Phantom. They were replaced under warranty due to a couple very small blemishes (shown later).




    The blemishes. If you look closely you can see a slight crease on the trim covering the levers. I had to take several pics before I could get them to show up.




    Shot of the tray mechanics.




    Shot of the monitor flip up portion showing the mechanics.




    A full size iPad Air for reference.




    And this is what they look like in the actual car, to give you an idea how they work.










    It's hard to show in pictures how well these are made. The quality of the hardware, levers/joints, bearings and all components is, as you would expect in a Rolls Royce, first rate.

    Simply add your choice of monitor/tablet and a little custom work to make your own "tray table" and "seat back covering" and you're going to have your buddies wondering where you got these from.

    I can provide detailed pictures of these in and out of the vehicle from any angle to give you an idea of exactly how they are assembled and how the monitor & trim are attached so it would be easy for you to customize them to your liking.

    These are a matching pair and I do not want to split them up.

    $750 firm for the pair (an absolute steal compared to retail prices).







  2. #2
    pickup1's Avatar
    pickup1 is offline Audiosystem,Dynaudio...



    Join Date
    Aug 2005
    Location
    Roanoke,TX
    Age
    49
    Posts
    7,686
    Post Thanks / Like
    Images
    19
    Feedback Score
    24 (100%)
    Mentioned
    29 Post(s)

    Re: Rolls Royce Tray Tables/Monitor Brackets

    Might want to try eBay,these will never sell here...




  3. #3
    jrdnhsnbrg's Avatar
    jrdnhsnbrg is offline Pimped my grandma's ride



    Join Date
    Aug 2012
    Location
    Menomonie, WI
    Age
    19
    Posts
    1,804
    Post Thanks / Like
    Feedback Score
    0
    Mentioned
    6 Post(s)

    Re: Rolls Royce Tray Tables/Monitor Brackets

    I offer $20



    01 Lincoln Continental - Mary

    XFL 12" on a VFL150.1, 4.5 cubes net @27Hz
    Powerware 150ah monster, SHCA 1/0 & 8ga
    Pioneer D Series 6.5" and 6x8" on a VFL150.4

    References: mylows10, 2000LaDe , VWGolfMKVI, Garcia915, UnderFire, joeybutts
    Quote Originally Posted by Beatin' View Post
    You HAVE to look.

    If after 5 wipes you're still getting mega shit on the paper, it's shower time.

  4. Likes SPL.Pantie.Soak liked this post
  5. #4
    Join Date
    Jan 2014
    Location
    Fort Lewis, WA
    Age
    18
    Posts
    60
    Post Thanks / Like
    Feedback Score
    0
    Mentioned
    0 Post(s)

    Re: Rolls Royce Tray Tables/Monitor Brackets

    Quote Originally Posted by jrdnhsnbrg View Post
    I offer $20
    I offer $21




  6. Likes jrdnhsnbrg liked this post
  7. #5
    jrdnhsnbrg's Avatar
    jrdnhsnbrg is offline Pimped my grandma's ride



    Join Date
    Aug 2012
    Location
    Menomonie, WI
    Age
    19
    Posts
    1,804
    Post Thanks / Like
    Feedback Score
    0
    Mentioned
    6 Post(s)

    Re: Rolls Royce Tray Tables/Monitor Brackets

    Quote Originally Posted by SPL.Pantie.Soak View Post
    I offer $21
    $21 and a handy



    01 Lincoln Continental - Mary

    XFL 12" on a VFL150.1, 4.5 cubes net @27Hz
    Powerware 150ah monster, SHCA 1/0 & 8ga
    Pioneer D Series 6.5" and 6x8" on a VFL150.4

    References: mylows10, 2000LaDe , VWGolfMKVI, Garcia915, UnderFire, joeybutts
    Quote Originally Posted by Beatin' View Post
    You HAVE to look.

    If after 5 wipes you're still getting mega shit on the paper, it's shower time.

  8. Likes SPL.Pantie.Soak liked this post
  9. #6
    Join Date
    Jan 2014
    Location
    Fort Lewis, WA
    Age
    18
    Posts
    60
    Post Thanks / Like
    Feedback Score
    0
    Mentioned
    0 Post(s)

    Re: Rolls Royce Tray Tables/Monitor Brackets

    Quote Originally Posted by jrdnhsnbrg View Post
    $21 and a handy
    I cant beat that- but apparently you can




  10. Likes jrdnhsnbrg liked this post
  11. #7
    jrdnhsnbrg's Avatar
    jrdnhsnbrg is offline Pimped my grandma's ride



    Join Date
    Aug 2012
    Location
    Menomonie, WI
    Age
    19
    Posts
    1,804
    Post Thanks / Like
    Feedback Score
    0
    Mentioned
    6 Post(s)

    Re: Rolls Royce Tray Tables/Monitor Brackets

    Quote Originally Posted by SPL.Pantie.Soak View Post
    I cant beat that- but apparently you can



    01 Lincoln Continental - Mary

    XFL 12" on a VFL150.1, 4.5 cubes net @27Hz
    Powerware 150ah monster, SHCA 1/0 & 8ga
    Pioneer D Series 6.5" and 6x8" on a VFL150.4

    References: mylows10, 2000LaDe , VWGolfMKVI, Garcia915, UnderFire, joeybutts
    Quote Originally Posted by Beatin' View Post
    You HAVE to look.

    If after 5 wipes you're still getting mega shit on the paper, it's shower time.

  12. Likes SPL.Pantie.Soak liked this post
  13. #8
    tat2bass's Avatar
    tat2bass is online now CarAudio.com Elite



    Join Date
    Aug 2011
    Location
    Cali
    Posts
    1,618
    Post Thanks / Like
    Feedback Score
    36 (100%)
    Mentioned
    17 Post(s)

    Re: Rolls Royce Tray Tables/Monitor Brackets

    Seems like someone wanted to come on and make it look like they own a RR. No one here will pay 750 for a set of brackets. An absolute steal, ****.

    I don't care if I did have the money I would never pay that kind of money for a RR.

    I couldn't in good conscious spend that much on a car to make my **** feel bigger when there are kidsin America starving.

    Whatever helps you sleep at night and feel better about yourself.




  14. #9
    dangonay's Avatar
    dangonay is offline Junior Member

    Threadstarter


    Join Date
    Jan 2014
    Location
    Vancouver
    Posts
    6
    Post Thanks / Like
    Feedback Score
    0
    Mentioned
    0 Post(s)

    Re: Rolls Royce Tray Tables/Monitor Brackets

    ^ I don't own a Rolls Royce, not sure why you'd say I'm "pretending" to have one. I'm a technician that works on them. Warranty replacement parts are kept for a period of time in case the factory wants them back and after that they get thrown out. Technicians often go through the "throwaway" parts to see if there's anything they want to keep. This is where I got these from.

    Seems like someone just wants to find a reason to complain and throw insults around before thinking a little.

    BTW, these brackets run for over $3k from Rolls Royce. That's for one of them, not the pair.



    My Feedback

    http://www.caraudio.com/forums/itrader.php?u=1034506

  15. #10
    los33's Avatar
    los33 is online now Car Audio G



    Join Date
    Apr 2014
    Location
    Houston, TX
    Posts
    410
    Post Thanks / Like
    Feedback Score
    1 (100%)
    Mentioned
    0 Post(s)

    Re: Rolls Royce Tray Tables/Monitor Brackets

    Quote Originally Posted by dangonay View Post
    ^ I don't own a Rolls Royce, not sure why you'd say I'm "pretending" to have one. I'm a technician that works on them. Warranty replacement parts are kept for a period of time in case the factory wants them back and after that they get thrown out. Technicians often go through the "throwaway" parts to see if there's anything they want to keep. This is where I got these from.

    Seems like someone just wants to find a reason to complain and throw insults around before thinking a little.

    BTW, these brackets run for over $3k from Rolls Royce. That's for one of them, not the pair.
    Actually its 3000$ with warranty and 2000 without warranty if purchased from a US rolls royce certified dealership.
    You can call any service in europe/germany that rents/sells rolls royce and get the part 750+shipping.

    I help out at lucas auto shop doing small work on lambos/rolls royce/farraris/corvettes etc... So no you must be a technician in a dealership.

    Anyone in houston, tx can check us out were located on grant rd near malcomson rd in front of hamilton elementary. Both the manager and owner have there lambos parked in the front.




  16. #11
    dangonay's Avatar
    dangonay is offline Junior Member

    Threadstarter


    Join Date
    Jan 2014
    Location
    Vancouver
    Posts
    6
    Post Thanks / Like
    Feedback Score
    0
    Mentioned
    0 Post(s)

    Re: Rolls Royce Tray Tables/Monitor Brackets

    ^ Yes, dealership technician. I'd be curious where in Europe these can be had for $750. Can you provide a link to any? I simply quoted the dealership price as there really is no place I know of outside of a dealer you could get them (aside from a wrecker, and they aren't going to be giving stuff away).

    And that's $750 for one, I'm guessing?



    My Feedback

    http://www.caraudio.com/forums/itrader.php?u=1034506

  17. #12
    los33's Avatar
    los33 is online now Car Audio G



    Join Date
    Apr 2014
    Location
    Houston, TX
    Posts
    410
    Post Thanks / Like
    Feedback Score
    1 (100%)
    Mentioned
    0 Post(s)

    Re: Rolls Royce Tray Tables/Monitor Brackets

    Quote Originally Posted by dangonay View Post
    ^ Yes, dealership technician. I'd be curious where in Europe these can be had for $750. Can you provide a link to any? I simply quoted the dealership price as there really is no place I know of outside of a dealer you could get them (aside from a wrecker, and they aren't going to be giving stuff away).

    And that's $750 for one, I'm guessing?
    I couldn't point you in the right direction as i do not purchase parts for a car i do not own. I help work on them.

    There is a reason non dealerships find cheaper parts, they get it from the source. Purchasing directly from the middle man cuts down the price and dealerships always raise prices for parts they do not have in stock 24/7 and have to be back ordered.

    Yes that is the price for one as all parts are hand made and leather is stitched by hand.




  18. #13
    dangonay's Avatar
    dangonay is offline Junior Member

    Threadstarter


    Join Date
    Jan 2014
    Location
    Vancouver
    Posts
    6
    Post Thanks / Like
    Feedback Score
    0
    Mentioned
    0 Post(s)

    Re: Rolls Royce Tray Tables/Monitor Brackets

    ^ I think you mean that is the price for a bare bones bracket without leather or wood. When they are replaced the wood veneer and leather are swapped over to the new bare bracket, as all wood & leather in a RR is matched at the RR factory - there are no outside companies that handle wood or leather.

    I'm well aware of non-dealerships finding cheaper parts - I worked in a Jaguar/Rolls/Range Rover independent shop for many years, and we often found outside components that were far cheaper than the dealer. But that only works for some parts - many are dealer-only. I've searched for these brackets and haven't seen anyone selling them, which is why I was curious if you had found a place.

    If they were easily available then I'd gladly adjust my price downwards accordingly.



    My Feedback

    http://www.caraudio.com/forums/itrader.php?u=1034506

  19. #14
    los33's Avatar
    los33 is online now Car Audio G



    Join Date
    Apr 2014
    Location
    Houston, TX
    Posts
    410
    Post Thanks / Like
    Feedback Score
    1 (100%)
    Mentioned
    0 Post(s)

    Re: Rolls Royce Tray Tables/Monitor Brackets

    Quote Originally Posted by dangonay View Post
    ^ I think you mean that is the price for a bare bones bracket without leather or wood. When they are replaced the wood veneer and leather are swapped over to the new bare bracket, as all wood & leather in a RR is matched at the RR factory - there are no outside companies that handle wood or leather.

    I'm well aware of non-dealerships finding cheaper parts - I worked in a Jaguar/Rolls/Range Rover independent shop for many years, and we often found outside components that were far cheaper than the dealer. But that only works for some parts - many are dealer-only. I've searched for these brackets and haven't seen anyone selling them, which is why I was curious if you had found a place.

    If they were easily available then I'd gladly adjust my price downwards accordingly.
    To get this kind of info you will need to be in contact with companies over seas.




  20. #15
    hispls's Avatar
    hispls is offline CarAudio.com Veteran



    Join Date
    Sep 2009
    Location
    Cape Cod, Massachusetts
    Posts
    6,262
    Post Thanks / Like
    Images
    15
    Feedback Score
    26 (100%)
    Mentioned
    107 Post(s)

    Re: Rolls Royce Tray Tables/Monitor Brackets

    I bought a small trailer that uses hinges made by Rolls Royce. They were pretty well busted up when I got them.... I almost vomited when I called to price replacements.

    I'm quite confident that 750$ would be a good deal for 99.9% of the parts at a RR dealership.

    The Achile's Heel of your plan is that you're posting these on a forum with the biggest collection of chiselers and deadbeats on the internet.

    Furthermore, I'd suspect that the sort of person that would pay 750$ for a Rolls Royce tray has enough money that they'd never even look online for it and simply have their dealership order it for them and not blink at the 3000$ MSRP.

    Definitely a cool item but you'll likely be hard pressed to find the buyer that sees the worth of it.




  21. Likes Freeman liked this post
Closed Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Rolls Royce Phantom JL audio build
    By dappa5 in forum Car Audio Build Logs - Cars/Trucks/SUVs
    Replies: 55
    Last Post: 02-22-2012, 08:14 PM
  2. How do I install monitors in a headrest that has no metal bracket in it?
    By shelzmike in forum Car Video, Security and Electronics
    Replies: 8
    Last Post: 02-19-2009, 10:37 PM
  3. 1212.1" Color LCD Monitor [Car Big Screen]
    By Rk in forum Wiring, Electrical and Installation Help
    Replies: 0
    Last Post: 01-05-2002, 11:28 AM
  4. 12.1" Color LCD Monitor [Car Big Screen]
    By Rk in forum General Discussion
    Replies: 0
    Last Post: 01-05-2002, 11:26 AM
  5. 12.1" Color LCD Monitor [Car Big Screen]
    By Rk in forum General Discussion
    Replies: 0
    Last Post: 01-05-2002, 11:25 AM

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may not post attachments
  • You may edit your posts
1e2 Forum