+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 26

Reload Thread: adjustable aeroports

  1. #1
    psychoacoustics's Avatar
    psychoacoustics is offline hammer and the evil one psychoacoustics is a Supporting Member of the forum!

    psychoacoustics is a Supporting Vendor of the forum!

    Join Date
    Dec 2007
    Location
    Buffalo NY
    Posts
    3,407
    Post Thanks / Like
    Images
    4
    Feedback Score
    9 (100%)
    Mentioned
    9 Post(s)

    adjustable aeroports

    figure id bring these to ca.com

    this isnt some PVC port its so much more than that they are stronger lighter and far more usable

    any size or length from 3-48" in diameter in 1" increments i can do 3,4 and 6" like psp but its a lot more to buy one of mine honestly unless your looking for the adjust-ability buy one of them id hate to see you spend the money needlessly

    now if you want a 5" 7" or 9" that's where my port fits in

    the 6,8 and 10" pvc is a very cheap alternative also

    here is where my port stands out its infinitely adjustable in length as long as the tubes are there


    i can make them from steel aluminium or stainless

    the flare radius gets bigger as the diameter gets larger to help with laminar airflow
    6-10" is a 2" radius
    11-15 is 3" radius
    16+ is 4" radius

    there is a 1" mounting flange that comes standard on them on both ends
    i can remove the inner one so it slips through the hole

    the adjust by one pipe sliding inside of the other pipe so the extended length is roughly double the compressed length

    they can also be made NON ADJUSTABLE at a lower price



    here are measurements of them standard i can make alterations to them in really any way you can imagine oval shape flares curved pipes bends triangle port i can do that !

    if you arent sure what size port you need post the box size and woofers you have and i can help with sizing

    here is a quick port area cheat sheet if you have a box program this shoud help

    4" 12.59 sq"
    5" 19.62 sq"
    6" 28.26 sq"
    7" 38.46 sq"
    8" 50.24 sq"
    9" 63.58 sq"
    10" 78.50 sq"
    11" 94.98 sq"
    12" 113.04sq"


    here are the OUTSIDE DIAMETER of the flares
    port size /OD flare size including mounting flange
    4" 9"
    5" 10"
    6" 12"
    7" 13"
    8" 14"
    9" 15"
    10" 16"
    11" 19"
    12" 20"



    pricing DOES NOT include shipping i can quote through UPS it all shipping will include full replacement insurance for the cost of the port and shipping just in case its crushed lost stolen or not delivered for some reason your covered


    if you are looking at the shipping for your self they will ship from 14120 NY and they will be roughly 2" larger than the outer dimensions of the port for packing materials

    i can drill mounting holes as many as you want and also provide mounting screws

    they can be left bare
    basic spray paint finish
    finished like a car with bondo and automotive paint
    or the stainless can be polished

    costs are as follows :
    4" 60$
    5" 70$
    6" 85$
    7" 100$
    8" 120$
    9" 135$
    10" 155$
    11" 175$
    12" 200$

    for anything besides the normal adjustable straight round port ask some questions i love to chat about this and will help design a box or port area requirements

    [/URL]



    [URL=http://i232.photobucket.com/albums/ee266/psychoacoustics/aeroports/VID_20120228_091417.mp4]
    38inchaero.mp4 video by psychoacoustics | Photobucket

    [URL=http://i232.photobucket.com/albums/ee266/psychoacoustics/aeroports/VID_20120228_091417.mp4]


    here is the biggest one ive done to date a 19" internal diameter


    if you have any questions ask them here for everyone's benefit

    they have been tested to not resonate audibly they are stronger than pvc and wood but if you feel it will be a problem i can include deadener in matt or paste format of my own formula

    they have been used in a world record car last year at iasca finals
    i have plenty of references of people that have used them if you need to talk to a proud owner ask ill get ya in touch with them



    Need an aero port? Any size 3-48" diameter ?
    Want it adjustable for tuning?

    WWW.psychoport.com




  2. #2
    mat3833's Avatar
    mat3833 is offline CarAudio.com Elite



    Join Date
    Mar 2008
    Location
    florida
    Posts
    1,060
    Post Thanks / Like
    Feedback Score
    2 (100%)
    Mentioned
    4 Post(s)

    Re: adjustable aeroports

    hmm, can you make any bends in them? these are **** and almost make me want to run aeros in my next build. unfortunatly ill have to model to find out how small of an aero is comparable to a 1"X12.5" slot port ~30 inches long. lol

    Matt




  3. #3
    psychoacoustics's Avatar
    psychoacoustics is offline hammer and the evil one psychoacoustics is a Supporting Member of the forum!

    Threadstarter
    psychoacoustics is a Supporting Vendor of the forum!

    Join Date
    Dec 2007
    Location
    Buffalo NY
    Posts
    3,407
    Post Thanks / Like
    Images
    4
    Feedback Score
    9 (100%)
    Mentioned
    9 Post(s)

    Re: adjustable aeroports

    yes any radius and angle you wanted pretty much if you can think it ill build it

    a 1x12.5 port would be a bad idea its too long and narrow but thats 12.5 square inches a 4" diameter pipe is equivalent to that



    Need an aero port? Any size 3-48" diameter ?
    Want it adjustable for tuning?

    WWW.psychoport.com

  4. #4
    mylows10's Avatar
    mylows10 is online now Cali DC PHD & Tantric rep



    Join Date
    Sep 2009
    Location
    monterey , ca
    Age
    50
    Posts
    17,400
    Post Thanks / Like
    Images
    9
    Feedback Score
    81 (100%)
    Mentioned
    463 Post(s)

    Re: adjustable aeroports

    nice ports bill, may have to get one soon ,maybe 2 8" ports for my next build




    pioneer avhx 5500 dvd, gzpa 1.4000 x 2
    ab vfl 350.4 ,7 pc 2150 and a 150 ah power ware agm ,275 amp singer alt , 2nd one coming soon
    cdt 6.5 es 6 im mids,cdt es 010 tweets,es 02 mids ,mx1000 3 way x overs , sky high and stinger hpm o gauge wires ,also 2 tantric hdd 15's in a 9.5. ^3 ported no wall box 11.5 octo port.
    NOR CAL DB DRAG JUDGE
    http://www.dcsoundlab.com

  5. #5
    mat3833's Avatar
    mat3833 is offline CarAudio.com Elite



    Join Date
    Mar 2008
    Location
    florida
    Posts
    1,060
    Post Thanks / Like
    Feedback Score
    2 (100%)
    Mentioned
    4 Post(s)

    Re: adjustable aeroports

    the port isnt optimal, but it models well and it the only way i can get the tuning i want with the size box i have. andthe aero would essentially have to be bent like this:

    Edit: might have to step up to a 5" port. i plan to be playing as low as 18hz and port noise *****.

    Matt




  6. #6
    rebelfromva's Avatar
    rebelfromva is offline CarAudio.com Veteran



    Join Date
    Jun 2011
    Location
    VA
    Posts
    3,818
    Post Thanks / Like
    Feedback Score
    16 (94%)
    Mentioned
    94 Post(s)

    Re: adjustable aeroports

    I'm looking into an 11" one Bill. Will be for 2 custom hdc3 12s. How high or low on tuning could it be adjusted to?



    09 Cobalt LT
    Headunit -Alpine CDA-9887
    Front Stage - PHD FB 6.1 PRO SIX M/B, FB 5.1 m/b, FB 1.1b tweets
    Highs amp -Pheonix Gold Xenon 100.4 & 200.4
    Sub stage - 2 DC M2 LVL 5 12s
    Sub amp - 2 DC 5.0Ks
    Electrical - Singer 270 alt, big 3 0/1 & 12g ofc audio technix, 2 XS d3400s
    Deadener - 80 mill Audiotechnix deadener
    "Trunk hit hard like Kimbo Slice"
    TEAM DC AUDIO

  7. #7
    psychoacoustics's Avatar
    psychoacoustics is offline hammer and the evil one psychoacoustics is a Supporting Member of the forum!

    Threadstarter
    psychoacoustics is a Supporting Vendor of the forum!

    Join Date
    Dec 2007
    Location
    Buffalo NY
    Posts
    3,407
    Post Thanks / Like
    Images
    4
    Feedback Score
    9 (100%)
    Mentioned
    9 Post(s)

    Re: adjustable aeroports

    That's great give me a few days and ill check shipping might be different depending on if I put them in one box or not



    Need an aero port? Any size 3-48" diameter ?
    Want it adjustable for tuning?

    WWW.psychoport.com

  8. #8
    psychoacoustics's Avatar
    psychoacoustics is offline hammer and the evil one psychoacoustics is a Supporting Member of the forum!

    Threadstarter
    psychoacoustics is a Supporting Vendor of the forum!

    Join Date
    Dec 2007
    Location
    Buffalo NY
    Posts
    3,407
    Post Thanks / Like
    Images
    4
    Feedback Score
    9 (100%)
    Mentioned
    9 Post(s)

    Re: adjustable aeroports

    Quote Originally Posted by mat3833 View Post
    the port isnt optimal, but it models well and it the only way i can get the tuning i want with the size box i have. andthe aero would essentially have to be bent like this:

    Edit: might have to step up to a 5" port. i plan to be playing as low as 18hz and port noise *****.

    Matt
    I could do that but I'm gonna need a length to get an idea what u need. Not sure high tight the 5" 180* bends could get

    Keep going on this one we will need to iron out the details a bit.



    Need an aero port? Any size 3-48" diameter ?
    Want it adjustable for tuning?

    WWW.psychoport.com

  9. #9
    Bettr n' Revrse's Avatar
    Bettr n' Revrse is offline I do what I want



    Join Date
    Dec 2010
    Location
    Grand Junction, CO
    Posts
    16,839
    Post Thanks / Like
    Feedback Score
    27 (100%)
    Mentioned
    72 Post(s)

    Re: adjustable aeroports

    Nice




    Western Rep.

    99 Honda CRV: (Always Changing) ___________ 79 F-150: Show Truck ________________
    -Head Unit: Eclipse CD7100________________ -Head Unit: Eclipse CD7100
    -Sub Stage: Sundown SD-2 8's sealed________ -Sub Stage: Looking
    -Mids/Highs: Deciding_____________________ -Mids/Highs: Scan Speak & Blaupunkt
    -Sub Amp: MMATS Hifi 6 channel____________ -Sub Amp: American Warrior Set (Zed Built)
    -Mid Amp: ^^^ 5/6 bridged at 1 ohm_________ -Mid Amp: ^^^

  10. #10
    psychoacoustics's Avatar
    psychoacoustics is offline hammer and the evil one psychoacoustics is a Supporting Member of the forum!

    Threadstarter
    psychoacoustics is a Supporting Vendor of the forum!

    Join Date
    Dec 2007
    Location
    Buffalo NY
    Posts
    3,407
    Post Thanks / Like
    Images
    4
    Feedback Score
    9 (100%)
    Mentioned
    9 Post(s)

    Re: adjustable aeroports

    Quote Originally Posted by rebelfromva View Post
    I'm looking into an 11" one Bill. Will be for 2 custom hdc3 12s. How high or low on tuning could it be adjusted to?

    That's not enough info to answer the question

    How many cubic foot is the box?
    Do you want it internal? If so how long is the dimension of the box from the side you want the hole on to the opposite wall?

    If external are there trunk boundaries or seats that will get in the way?



    Need an aero port? Any size 3-48" diameter ?
    Want it adjustable for tuning?

    WWW.psychoport.com

  11. #11
    psychoacoustics's Avatar
    psychoacoustics is offline hammer and the evil one psychoacoustics is a Supporting Member of the forum!

    Threadstarter
    psychoacoustics is a Supporting Vendor of the forum!

    Join Date
    Dec 2007
    Location
    Buffalo NY
    Posts
    3,407
    Post Thanks / Like
    Images
    4
    Feedback Score
    9 (100%)
    Mentioned
    9 Post(s)

    Re: adjustable aeroports

    did an oval on e recently what you guys think?

    OVAL PSYCHO AEROPORTS Photos by psychoacoustics | Photobucket



    Need an aero port? Any size 3-48" diameter ?
    Want it adjustable for tuning?

    WWW.psychoport.com

  12. Likes vetkilr liked this post
  13. #12
    vetkilr's Avatar
    vetkilr is offline CarAudio.com Veteran



    Join Date
    Mar 2006
    Location
    brandon,fl
    Posts
    3,329
    Post Thanks / Like
    Feedback Score
    0
    Mentioned
    1 Post(s)

    Re: adjustable aeroports

    Dang man cool port and nice box setup also...



    refs:Flakko,saywhat,mmata13(sold 1605D amp),nVRuckus(bought fuse blocks), dkguitarist(traded 2 amps),MikeyB(sold MD2),CBFryman2(sold MD2),gundecker (bought 20.1),Sakura (2 Trades),killahbean (bought DMX12),Loud3(Bought Fiberglass Kicks),tb2007(sold diamond amp),iamamp3pimp(bought box's 3 so far /sold 20.1/sold 2 L7s,ZX650.4),chillcat34433(bought 12"RF HX2), ultimate157(sold opti 2000D),bballrrt06(sold opti 2000D),GrnEydDvl(sold kx2500.1),BassAddictJ (sold kx2500.1),pwuthedon(bought Lanzar 4000D)

    lostsoul (5.25 mtx comps) Bad once I hooked them up.....................

  14. #13
    psychoacoustics's Avatar
    psychoacoustics is offline hammer and the evil one psychoacoustics is a Supporting Member of the forum!

    Threadstarter
    psychoacoustics is a Supporting Vendor of the forum!

    Join Date
    Dec 2007
    Location
    Buffalo NY
    Posts
    3,407
    Post Thanks / Like
    Images
    4
    Feedback Score
    9 (100%)
    Mentioned
    9 Post(s)

    Re: adjustable aeroports

    thanks..... just did 2 8"x24" solid ones last nigh







    Need an aero port? Any size 3-48" diameter ?
    Want it adjustable for tuning?

    WWW.psychoport.com

  15. #14
    psychoacoustics's Avatar
    psychoacoustics is offline hammer and the evil one psychoacoustics is a Supporting Member of the forum!

    Threadstarter
    psychoacoustics is a Supporting Vendor of the forum!

    Join Date
    Dec 2007
    Location
    Buffalo NY
    Posts
    3,407
    Post Thanks / Like
    Images
    4
    Feedback Score
    9 (100%)
    Mentioned
    9 Post(s)

    Re: adjustable aeroports

    not sure whos seen these or who im friends with on facebook but here are some things im working on


    in these pics there are 2 prototypes ports the one on the left is a 6" the one on the right is an 8"

    the left is a super high power it has a very large radius flare rate for ultra low turbulence

    the right is for tight clearances such as trunks and crx's that cant break the window line
    both have nearly the same mounting size ones almost 12"

    i will be offering these in all the same sizes as ive been doing so 3,4,5,6,7,8,9,10,11,12....19.....all the way to 48"








    Need an aero port? Any size 3-48" diameter ?
    Want it adjustable for tuning?

    WWW.psychoport.com

  16. #15
    psychoacoustics's Avatar
    psychoacoustics is offline hammer and the evil one psychoacoustics is a Supporting Member of the forum!

    Threadstarter
    psychoacoustics is a Supporting Vendor of the forum!

    Join Date
    Dec 2007
    Location
    Buffalo NY
    Posts
    3,407
    Post Thanks / Like
    Images
    4
    Feedback Score
    9 (100%)
    Mentioned
    9 Post(s)

    Re: adjustable aeroports

    this is truly amazing nearly a 3 db improvement just by adjusting the length

    How to GAIN nearly 3db in a few seconds..........*Psychoacoustics* - YouTube



    Need an aero port? Any size 3-48" diameter ?
    Want it adjustable for tuning?

    WWW.psychoport.com

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. how do u get the rigth lenght when using aeroports
    By carcraze in forum Wiring, Electrical and Installation Help
    Replies: 1
    Last Post: 11-28-2005, 04:34 PM
  2. how to adjust sub to get what i want out of it
    By lastman in forum Wiring, Electrical and Installation Help
    Replies: 1
    Last Post: 05-18-2002, 06:41 AM
  3. Gain Adjustment
    By SOUNDz in forum Subwoofers
    Replies: 3
    Last Post: 04-20-2002, 10:47 AM
  4. need HELP adjusting Amp
    By derekls in forum Subwoofers
    Replies: 1
    Last Post: 03-21-2002, 12:00 PM
  5. adjusting gains,eq,and freq on amps
    By subsonic in forum Wiring, Electrical and Installation Help
    Replies: 0
    Last Post: 02-26-2002, 10:22 PM

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may not post attachments
  • You may edit your posts

1e2 Forum