April/May Special

[jeremyg1]

I was recently able to get a very decent deal on sheets of 3/4 inch MDF and wanted to pass that savings on to you. For the next few months I will be offering bare MDF enclosures for the following:

Up to 1/2 sheet MDF - 50 plus shipping
Between 1/2 sheet and full sheet MDF - 75 plus shipping
Between a full sheet and 1 1/2 sheets MDF - 100 plus shipping
Between 1 1/2 sheets and 2 sheets MDF - 125 plus shipping

Anything larger will need to be discussed.

Please PM/text/email me with any questions.

Thank you.

[jeremyg1]

I realize that saying "1/2 of a sheet" is somewhat vague....so here are some examples

Elemental designs recommended dual 11kv2 enclosure:

2 cubic feet net
tuned to 30Hz:



cutsheet:



So that uses a little more then 1/2 sheet so we would be looking at 75 plus shipping.

JL Audio 13W7 recommended vented enclosure from their manual

2.375 cubic feet net tuned to 30 Hz



Just a hair over 1/2 of a sheet so we would be looking at 75

I will throw some more examples up later tonight when I get some more free time.

[jeremyg1]

SSA Icon optimal 10 inch vented enclosure



50 plus shipping

[TheUnderFighter]

I was gonna say, listing it in cubes might be easier... Or sizes... it would seem most 10" can stay at a half sheet, maybe some 12s... then a pair of anything or anything bigger than a 12 will be at least over a half sheet.
Great prices man, I'll be sure to recommend this to anyone looking for an enclosure.

[jeremyg1]

I was gonna say, listing it in cubes might be easier... Or sizes... it would seem most 10" can stay at a half sheet, maybe some 12s... then a pair of anything or anything bigger than a 12 will be at least over a half sheet.
Great prices man, I'll be sure to recommend this to anyone looking for an enclosure.

Yeah, that is basically how it works out.

Most 10s vented will fit under 1/2 a sheet while 12s are boarderline. A 2 cubic foot 12 inch enclosure with a 4 inche aero port can be done with 1/2 a sheet, but with slot porting you are over 1/2 sheet.

[Full Tilt]

Think you could fit a 3-3.5 cubic ft. box in 1-1.5 sheets?

[jeremyg1]

I believe so. What driver(s) are you using? Do you have a design already drawn up or need something?

[Full Tilt]

I believe so. What driver(s) are you using? Do you have a design already drawn up or need something?

I haven't even started a design yet. I've got an SA-15 in mind..but I'm not 100% set on it.

[Kangaroux]

Think you could fit a 3-3.5 cubic ft. box in 1-1.5 sheets?

I fit the box for my 18 (which is 6.5 cubes) in just over 1 sheet (only because I did a double baffle)

[Full Tilt]

I fit the box for my 18 (which is 6.5 cubes) in just over 1 sheet (only because I did a double baffle)

I suppose now is as good of time as ever to ask what a 'baffle' really is?

[Kangaroux]

I suppose now is as good of time as ever to ask what a 'baffle' really is?

Baffle = the side of the box that your sub is mounted to

[Full Tilt]

Baffle = the side of the box that your sub is mounted to

So a double baffle would be 2 sheets on the front side?

Wouldn't that use more MDF?

[Kangaroux]

So a double baffle would be 2 sheets on the front side?

Wouldn't that use more MDF?

Yeah double baffle is 2 pieces. I meant to say I could have fit it onto 1 sheet but I used a double baffle so that's why it was a little over 1 sheet

[Full Tilt]

Yeah double baffle is 2 pieces. I meant to say I could have fit it onto 1 sheet but I used a double baffle so that's why it was a little over 1 sheet

Ah, okay. Wow, you did pretty well for yourself then. Maybe if Jeremy ends up making me a box, he could keep it under 1 sheet.

[Kangaroux]

Ah, okay. Wow, you did pretty well for yourself then. Maybe if Jeremy ends up making me a box, he could keep it under 1 sheet.

For a single 15? Yeah you can fit that onto a single sheet all day. Built a 15" box for a local recently and used maybe 3/4 or 2/3 of the sheet.