Fair enough Joe. If you're ever interested in upgrading your setup, I'll definitely drive down to Cinci and pick pu what you're replacing. >.>
Fair enough Joe. If you're ever interested in upgrading your setup, I'll definitely drive down to Cinci and pick pu what you're replacing. >.>
Refs: Victory, Pickler(2x). JessAlba452, revrider1, mihklo, Grinder1989(2X), hoxie08, mrwigglezdj, bamavoo, Louisiana-CRX, plyer3, civicman07, 03F150MrSBF, k_schutte eBay ID: bryan191
By then I figure I would have enough for a pair of these.
http://www.dali.dk/us/page245.aspx?sub=266∏=567
OR
Thiel CS3.7
OR
B&W 800D
OR
PMC MB2 XBD
![]()
Last edited by joetama; 04-21-2008 at 12:25 AM.
Refs: Victory, Pickler(2x). JessAlba452, revrider1, mihklo, Grinder1989(2X), hoxie08, mrwigglezdj, bamavoo, Louisiana-CRX, plyer3, civicman07, 03F150MrSBF, k_schutte eBay ID: bryan191


Hrm...it's tough, with the way the room is set up, you can see in the first pic...if I move the front right over any more then it is, it'll be just floating in the middle of the room, and the closet is right next to the left front.
That's one bad thing about this room...it's got a few areas where it's oddly shaped.
Just try moving them forward and out 6 inches or so if you can.
You might see a difference from that little change.
If not however it works and you are happy.![]()

Let me know how it works.
I'm just **** about speaker positioning.
You said ****, uh huh huh uh
/butthead
should be getting the receiver wednsday
Refs : nismos14, Slammed x3, Team H&K, RetroAudioInc, 2002XLT, tc3k101, Fusion_Freak, IAmMurph, louisiana_crx, fast85_gt, Ridnclean x3,
woofercooker, lil_italy773 x2, 1mtx1, flipx99, MSW Danny, the_greatest_penn, jco1385, walksup, darkhunter139, TurdFurgeuson2, jmanpc, explorer2,
Jep772, 86yota, fargof, brtnboarder3241, Pitbull12887, Spooney, Phers1er,
so would those full ranges be a decent choice?
cause if im doing a 2 way i only want to do it for the center channel. id like to keep the others just 1 driver
and would would be deep bass with tinny highs? im assuming i would have to get titanium or aluminum tweeters. no ribbons they are too expensive.
Refs : nismos14, Slammed x3, Team H&K, RetroAudioInc, 2002XLT, tc3k101, Fusion_Freak, IAmMurph, louisiana_crx, fast85_gt, Ridnclean x3,
woofercooker, lil_italy773 x2, 1mtx1, flipx99, MSW Danny, the_greatest_penn, jco1385, walksup, darkhunter139, TurdFurgeuson2, jmanpc, explorer2,
Jep772, 86yota, fargof, brtnboarder3241, Pitbull12887, Spooney, Phers1er,
Bookmarks