i was wondering what is the best way to fix the engine/alternator noise? do i ground all of the rca cables to fix the noise? and i also notice when i plug in the radio antenna that it makes a loud beep noise and it goes away when i unplug it
i was wondering what is the best way to fix the engine/alternator noise? do i ground all of the rca cables to fix the noise? and i also notice when i plug in the radio antenna that it makes a loud beep noise and it goes away when i unplug it
More then likely it's the pico fuse issue so you'll need to ground them. If you really want to try re-grounding h/u/amp
Ref's:1. Midwestcustoms 1.5. Desertheat 2. Mjbailey 3. Terryracing86 4. Sickmint79 5. Untouchable11 6. mattj 7. Ssweet96 8. Kool9accord 9.Kristinspapi10. Kmhogan224 11. Alpine3612 -x3- 12. Vectork39 13. Livinlife 14.Chriscivic 15. Violentraptor 16. Ricky616 17. Bassaddictj 18.orioles26 19.Khail19 20. jak3th3snak311 21. Myjaja 22. Springy101 x2 23. Ali1 24. Privatepastry 25. Plus about 10+ more..
well what happened was i forgot my stereo was on while i was putting in a new speaker and the terminal off the speaker broke and hit the bottom of the speaker which caused the noise.. so just ground all 4 rca cables?
You prob popped it. You'll need to ground them. What I did with my old 8600mp was wrap some 16-18-20awg wire (wire doesn't need to big) to the rca's behind the h/u and ground it to the screw in back of it. Then used electrical tape securing the wire to rca's. Get a full turn w/ the wire when doing each rca.
Ref's:1. Midwestcustoms 1.5. Desertheat 2. Mjbailey 3. Terryracing86 4. Sickmint79 5. Untouchable11 6. mattj 7. Ssweet96 8. Kool9accord 9.Kristinspapi10. Kmhogan224 11. Alpine3612 -x3- 12. Vectork39 13. Livinlife 14.Chriscivic 15. Violentraptor 16. Ricky616 17. Bassaddictj 18.orioles26 19.Khail19 20. jak3th3snak311 21. Myjaja 22. Springy101 x2 23. Ali1 24. Privatepastry 25. Plus about 10+ more..
so i wrapped some wire around my 6 rca cables and then i grounded it to the metal on the car and the noise is still there
ok so i grounded the wires and the sound is pretty much gone, but that is when my antenna is unplugged... when i plug the antenna in it starts getting loud again.. is there anyway to fix that? i haven't listened to the radio in over 5 months lol
Any ideas?
Bookmarks