Closed Thread
Results 1 to 13 of 13

Reload Thread: Imprint and which Alpine HU?

  1. #1
    tee's Avatar
    tee
    tee is offline You know



    Join Date
    Jul 2007
    Location
    BR
    Posts
    550
    Post Thanks / Like
    Mentioned
    1 Post(s)

    Imprint and which Alpine HU?

    Is there any benefits with the 9887 and its Imprint, versus any other Alpine unit that is Imprint compatible? I don't know how to tune, so I just want to get an Imprint compatible HU and let it tune for me. I don't any any extra tuning stuff, except for maybe some basic ones to tweak the Imprint a little bit.

    How do the iDA-X100 or 305 sound with Imprint? I'm asking this because I would really prefer to use an iPod over cds, and the best options look like one of those mentioned.

    Thanks alot.







  2. #2
    mcsoul's Avatar
    mcsoul is offline such is life



    Join Date
    Mar 2008
    Location
    dfw
    Posts
    4,427
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Imprint and which Alpine HU?

    Good question, I'm in to hear the answer.



    ________________________
    Car: 2004 Nissan Altima 3.5 manual
    Head unit: Alpine CDA-9815 (running active)
    Midbass: Morel HU-621 Hybrid Uniflow 8 ohms
    Mid Amp: Audison lrx 4.300 bridged 2x140w @ 8 ohms
    Doors: 24ft Damplifier Pro, Second Skin D-flex pads, eggcrate foam, sealed up.
    Tweeter: SEAS 27TFFNC
    High Amp: Audison Lrx-2.150
    Subs: Two RE SE 12 d4's
    Box: 4 cubes net at 30hz
    Sub Amp: Sound Stream Van Gough 1600.2
    Electrical: Knu Flex 1/0, Batcap 2000 in back
    Rear Deck: No 6x9's just holes and grills

  3. #3
    nineball's Avatar
    nineball is offline too many toys...



    Join Date
    Feb 2008
    Location
    home
    Posts
    1,921
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Imprint and which Alpine HU?

    the 9887 has all the abilities of an imprint kit built in, with the exception of the auto-tuning. it also requires a different imprint kit than the 9886 or ida line. the imprint kit for the 9887 gets connected to the unit, does it's auto tuning and the settings are saved in the 9887. i believe you can save more than 1 setting but don't quote me on that. the imprint it for the 9887 can be bought and returned to places like crutchfield for a nominal fee (they charge you ~$50 when you return it because they know what you bought it for).

    things are a bit different for the 9986, x100, x305 and any other model that uses the other imprint kit. there are 2 parts to buy, the processor itself and the software/mic. the processor will give you the same controls that the 9887 has built in and allow you to tune the system manually to your liking. this processor must remain connected to the hu at all times or you will lose the ability to control the sound (with the exception of bass/treble controls built into the hu). the software/mic part is only used for the auto tuning part.


    i had the x100 and the full imprint kit and i was less than pleased with the results. i did the auto tuning several times, from 3 mic positions to using all it would let me. i found i could do a much better job my manually changing all the settings vs using the mic. another problem the auto tuning has is that the sub levels are terribly low, so much so that some walk-thrus actually tell you to turn the gain up on the sub amp before you auto tune, then lower it back down to your tastes after if need be. i personally did not like the sq from the x100/imprint kit and promptly sold mine a week after installing it. i also had an x001 which cannot use the imprint kit and the sq on that was just as bad as the x100 imo.





    Quote Originally Posted by eharri3 View Post
    I have 4 12s getting 2K watts rms and my front stage is 4 Walmart JVC coaxials running off 16 watts rms of head unit power. My sub sounds fine but my mids and highs don't sound very clear and start to distort long before my subs do. Anybody know why? Any suggestions?

  4. #4
    JrVtecAccord's Avatar
    JrVtecAccord is offline Senior VIP Member



    Join Date
    Jan 2008
    Location
    Dallas,TX
    Posts
    355
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Imprint and which Alpine HU?

    I've used the X305 & x100 with the H100 processor. You have to remember the auto calibration is trying to give you a flat EQ response, not an over dynamic bass & treble sound.

    I will separate my opinions by PROs & CONs.

    PROs
    • Decent job at producing a flat EQ curve.
    • Great job with TA settings, really moved my sound stage up front.
    • Purchase a 18ft AINET cable and have the processor next to your amps,
    • Simple to use

    CONs
    • Once you auto calibrate, NO EQ, TA or crossover points/slopes adjusting.
    • Sets crossover points to low, I believe it set my Polk SR6500s to 40 HZ every time I ran the tunning. Had to use the HPF on the amps.
    • Sub levels are to LOW

    That's all I can think of right now, if you have any specific questions let me know.



    OEM Navi HU | JL C5-650x | SL95 | JL 300/4 | UNDER CONSTRUCTION what to do
    My Build Log | refs/feedback

  5. #5
    nineball's Avatar
    nineball is offline too many toys...



    Join Date
    Feb 2008
    Location
    home
    Posts
    1,921
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Imprint and which Alpine HU?

    i could be wrong but i am pretty sure you are wrong about not being able to change the settings. i know i was able to go in and change anything i wanted to (via the hu controls) after the auto-tuning was done.

    what's the point of buying the extra cable and having the imprint near the amps? most people, like myself, already have all the rca cables run from the hu to the amps.





    Quote Originally Posted by eharri3 View Post
    I have 4 12s getting 2K watts rms and my front stage is 4 Walmart JVC coaxials running off 16 watts rms of head unit power. My sub sounds fine but my mids and highs don't sound very clear and start to distort long before my subs do. Anybody know why? Any suggestions?

  6. #6
    Buck's Avatar
    Buck is offline always low Buck is a Supporting Member of the forum!



    Join Date
    May 2008
    Location
    Nashville
    Posts
    18,378
    Post Thanks / Like
    Mentioned
    253 Post(s)

    Re: Imprint and which Alpine HU?

    I'm in for this one.



    Alpine - ASE (local) - Batcap - C&D Tech - CT Sounds - DC - eD - Excessive Amperage - Rainbow

  7. #7
    JrVtecAccord's Avatar
    JrVtecAccord is offline Senior VIP Member



    Join Date
    Jan 2008
    Location
    Dallas,TX
    Posts
    355
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Imprint and which Alpine HU?

    Quote Originally Posted by nineball View Post
    i could be wrong but i am pretty sure you are wrong about not being able to change the settings. i know i was able to go in and change anything i wanted to (via the hu controls) after the auto-tuning was done.

    what's the point of buying the extra cable and having the imprint near the amps? most people, like myself, already have all the rca cables run from the hu to the amps.
    After the settings are done and you enable the "Imprint" you can't adjust settings. Trust me, I have used the H100 combo for some time. You can enable and disable when ever you want, but the changes you make will not affect the settings when you enable the Imprint again.

    Having a single cable from the front to rear of the trunk made things easier on MY install. It's a much cleaner look IMO, plus I used 1.5' RCA cables which are cheaper than a 6 ch 15-18' cable.



    OEM Navi HU | JL C5-650x | SL95 | JL 300/4 | UNDER CONSTRUCTION what to do
    My Build Log | refs/feedback

  8. #8
    Buck's Avatar
    Buck is offline always low Buck is a Supporting Member of the forum!



    Join Date
    May 2008
    Location
    Nashville
    Posts
    18,378
    Post Thanks / Like
    Mentioned
    253 Post(s)

    Re: Imprint and which Alpine HU?

    The EQ on the 9887. Is there a 7 band graphic shared by both the front and rear? Or is there a separate EQ for the front and a separate one from the rear? (so the channels could be tuned differently)



    Alpine - ASE (local) - Batcap - C&D Tech - CT Sounds - DC - eD - Excessive Amperage - Rainbow

  9. #9
    Buck's Avatar
    Buck is offline always low Buck is a Supporting Member of the forum!



    Join Date
    May 2008
    Location
    Nashville
    Posts
    18,378
    Post Thanks / Like
    Mentioned
    253 Post(s)

    Re: Imprint and which Alpine HU?

    This is from crutchfield.

    Bass and Treble Controls: The headunit features independent Bass and Treble controls that allow you to adjust each setting from -7 to +7 once you have calibrated your vehicle's interior sound with the optional Alpine IMPRINT software (500KTX100E, sold separately).



    Alpine - ASE (local) - Batcap - C&D Tech - CT Sounds - DC - eD - Excessive Amperage - Rainbow

  10. #10
    nineball's Avatar
    nineball is offline too many toys...



    Join Date
    Feb 2008
    Location
    home
    Posts
    1,921
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Imprint and which Alpine HU?

    Quote Originally Posted by JrVtecAccord View Post
    After the settings are done and you enable the "Imprint" you can't adjust settings. Trust me, I have used the H100 combo for some time. You can enable and disable when ever you want, but the changes you make will not affect the settings when you enable the Imprint again.

    Having a single cable from the front to rear of the trunk made things easier on MY install. It's a much cleaner look IMO, plus I used 1.5' RCA cables which are cheaper than a 6 ch 15-18' cable.


    well we were both sorta right. if you let the system auto-tune for you once it is done you cannot change the settings. if you manually set everything (crossover points, ta, eq, etc) you can go back and change any setting you want to at any time without having to start over. this is just another reason, imo, to forget about the auto-tuning and do it yourself.





    Quote Originally Posted by eharri3 View Post
    I have 4 12s getting 2K watts rms and my front stage is 4 Walmart JVC coaxials running off 16 watts rms of head unit power. My sub sounds fine but my mids and highs don't sound very clear and start to distort long before my subs do. Anybody know why? Any suggestions?

  11. #11
    tee's Avatar
    tee
    tee is offline You know

    Threadstarter


    Join Date
    Jul 2007
    Location
    BR
    Posts
    550
    Post Thanks / Like
    Mentioned
    1 Post(s)

    Re: Imprint and which Alpine HU?

    Has anyone used Imprint on more than one Alpine HU before? Were there any changes in SQ?




  12. #12
    got-one-eight's Avatar
    got-one-eight is offline CarAudio.com Elite



    Join Date
    May 2009
    Location
    Houston, Tx
    Age
    35
    Posts
    705
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Imprint and which Alpine HU?

    Ive done it on two rides. To correct a few ppl there are settings after the tune although nothing crazy. You get Bass and Treble adjustments. The low bass volume is easily fixed by lowering the gains before the tune then raising back up after the tune. This is even recommended in the manual. Someone mentioned this goes for a flat tune. That is not correct for Imprint. You get three CURVES to choose from. Each has its own sound and is by no means a flat sound lacking highs. I found I lacked some midbass after the tune. I also felt like the midrange was to sharp and not easy to listen to at high volume or close to high. I am still new to the Imprint also and there isn't much information out there on it. Plus I am doing one in a truck that has become more of a pain. In the end I can't get the sound as good as the Imprint can do. So that makes it worth it to me. I just wish I had more adjustment after the auto tune. Ive made 3 runs in a car and 1 run in my truck so there is still lots of playing to do.




  13. #13
    Join Date
    Oct 2008
    Location
    General Area
    Posts
    113
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Imprint and which Alpine HU?

    Quote Originally Posted by got-one-eight View Post
    Ive done it on two rides. To correct a few ppl there are settings after the tune although nothing crazy. You get Bass and Treble adjustments. The low bass volume is easily fixed by lowering the gains before the tune then raising back up after the tune. This is even recommended in the manual. Someone mentioned this goes for a flat tune. That is not correct for Imprint. You get three CURVES to choose from. Each has its own sound and is by no means a flat sound lacking highs. I found I lacked some midbass after the tune. I also felt like the midrange was to sharp and not easy to listen to at high volume or close to high. I am still new to the Imprint also and there isn't much information out there on it. Plus I am doing one in a truck that has become more of a pain. In the end I can't get the sound as good as the Imprint can do. So that makes it worth it to me. I just wish I had more adjustment after the auto tune. Ive made 3 runs in a car and 1 run in my truck so there is still lots of playing to do.
    Did you mess with the Subwoofer System Settings? Because i know this adjustment will make the subs have their "own volume adjustment" or have it so they go up with the volume. Check the manual for more information.

    As far as the imprint being better/worse on the 9887, i couldn't tell you but i do know that if the shop doesn't do the tuning properly, like what happened with me and got me charged 50$ for make my car sound like complete ****, It WILL make it sound horrible.

    For example, I had a 9887 installed and "tuned" by a local shop and after i got it back i swore all they did was set the fader/balance all to the front driver side. Boy was i wrong.. they tuned it setting the microphone next to the speaker which made it sound like whatever speaker the listener is sitting closest to be the only speaker with sound.

    Good luck, and make sure it's tuned the proper way.




Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum