ground the parking brake wire.
2007 Red Ford Focus ZX4 SE
- Clarion DXZ955MC -
- MB Quart RSD216 - 2 MB Quart RWE-354 in 4 cubic feet sealed -
- MB Quart DSC4125 - Audiopipe AP1500.1D - Optima Blue Top -
Team High Sexage
it may need a switched ground signal...
go to www.termpro.com and go to there forums under source units i did a how to by pass a jensen with the switched input
I'm told by another member that grounding the parking brake wire wont work on this unit.
are you guys for sure thats all that has to be done?
Try it and find out.
99 "The Danger Ranger"
HU: Pioneer Premier 880PRS
Comps: Crystal Mobilesound SSCS 6
Comp Amp: LA S2.500--150w x2
Sub: Diamond Audio D3 10
Sub Amp: RF P3001--375w x1
thanks, i spend 900 to test it out haha
I'm installing a new HU right now and I wanted to verify that I was understanding this correctly. It's a JVC unit into a Toyota and I'm using a wiring harness. So does this mean that I can crimp together the ground from the wiring harness together with the ground from the HU and the parking brake wire from the HU and it will work properly? I don't have to seek out someplace else to ground the parking brake wire?
grounding that wire worked on mine, and mines the singal DIN version of urs
Pioneer Avic N5 Navi + CD-UB100 USB Adapter. RARE Circa 1996 PPI Ax606.2 in BLACK (1 of 400ish made) with 2 rare black graphic spacers.
CDT DRT-25 1'' Silk Dome Tweeters / CDT ES-04 4'' Midranges / RE Audio XXX 6.5'' 2ohm Neo Mids In Glassed Kick Pods
American Power Systems 240amp H.O. Alty / (2) Deka 8a31, 1/0 front to back.
Unknown Prototype 3k @ 1ohm. TRF/PSI 8 layer 4in coil hybrid beast in 3 cubs @ 33Hz / Raammat 40sqft in the trunk.