+ Reply to Thread
Results 1 to 2 of 2

Reload Thread: Fs Ms8

  1. #1
    The Camry's Avatar
    The Camry is online now Hey, I Try.



    Join Date
    Sep 2013
    Location
    Western Oregon
    Posts
    2,897
    Post Thanks / Like
    Feedback Score
    6 (100%)
    Mentioned
    14 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    1305 Post(s)

    Fs Ms8

    $300 shipped anywhere.

    Works perfectly. No issues. Has some of the set screws replaced, shown in pics. Everything will be sealed and packed immaculately.

    Screen has small scratches that dont show when its on.

    All accessories included.

    Sent from my SGH-M919 using Tapatalk



    Gain on an amplifier to meant to be matched to the output voltage of your headunit. Think 3 volt, 4 volt, 5 volt pre out specs you see on headunit specs. This is how gain works for a given pre out(5 volt) theoretically. However most head units clip(start to distort) at around 80% of your volume so your 5 volt pre out wont give 5 volts Cleanly. You will most likely get 4 volts out at something like 33/40 on your volume knob and would thus set your gain to 4 volts. (these things can be measured with a GOOD Multimeter. )
    80% of your total volume is (max volume) X 0.8.
    Example is 40(is your max volume so, 40 X .8=32





  2. #2
    The Camry's Avatar
    The Camry is online now Hey, I Try.

    Threadstarter


    Join Date
    Sep 2013
    Location
    Western Oregon
    Posts
    2,897
    Post Thanks / Like
    Feedback Score
    6 (100%)
    Mentioned
    14 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    1305 Post(s)

    Re: Fs Ms8

    Welp, put in the wrong controller in the pic. I have the MS8 remote that would come with. The one in the pic is a pioneer controller. My bad.



    Gain on an amplifier to meant to be matched to the output voltage of your headunit. Think 3 volt, 4 volt, 5 volt pre out specs you see on headunit specs. This is how gain works for a given pre out(5 volt) theoretically. However most head units clip(start to distort) at around 80% of your volume so your 5 volt pre out wont give 5 volts Cleanly. You will most likely get 4 volts out at something like 33/40 on your volume knob and would thus set your gain to 4 volts. (these things can be measured with a GOOD Multimeter. )
    80% of your total volume is (max volume) X 0.8.
    Example is 40(is your max volume so, 40 X .8=32


+ Reply to Thread

User Tag List

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may not post attachments
  • You may edit your posts
1e2 Forum