+ Reply to Thread
Results 1 to 2 of 2

Reload Thread: WinISD help

  1. #1
    MikesJeepTj's Avatar
    MikesJeepTj is offline Junior Member



    Join Date
    Jul 2013
    Location
    Jupiter, Fl
    Posts
    16
    Post Thanks / Like
    Mentioned
    0 Post(s)

    WinISD help

    Im trying to input parameters for my sub (ssa icon 10) but cant find the Re and Pe, what do I enter for this?







  2. #2
    trumpet's Avatar
    trumpet is online now Supporting Vendor trumpet is a Supporting Member of the forum!

    trumpet is a Supporting Vendor of the forum!

    Join Date
    Jan 2011
    Location
    Langdon, ND
    Age
    33
    Posts
    4,403
    Post Thanks / Like
    Mentioned
    75 Post(s)

    Re: WinISD help

    Pe stands for Power Entered, or the watts from the amplifier. I use either the RMS rating from the manufacturer or the RMS rating of the amplifier I intend to use.

    You can get the published Re value from the manufacturer. Otherwise you can use a multimeter, get the resistance of your leads by touching them together, test the impedance of the voice coil(s), then subtract the resistance of the leads to get the DC resistance. I believe you can get Re for dual voice coils in parallel by dividing your measurement by 2. If they'll be wired in series you should multiply by 2.




    Small town service, family owned and operated. See our new mobile friendly web site at www.513electronics.com
    Home to CDT Audio's Systems Design Specialist
    Our CDT Audio dealer store, Clarion,_JBL,_Pioneer,_Precision_Power,_RE_Audio,_DB Drive,_Metra,_T-Spec, perfect fit speaker kits for your vehicle
    My system: Pioneer AVH-4000NEX, JBL MS-8, Clarion XC6610 x 2, CDT 6.7"/4"/1.1" in the front doors, 4"/1.1" center channel, QES-1220 12" x 2, Clarion SRG-1622R rear fill

+ Reply to Thread

Similar Threads

  1. Winisd help
    By hoodkid in forum Enclosure Design & Construction Help
    Replies: 2
    Last Post: 07-22-2005, 12:45 AM
  2. WinISD Help
    By up_high in forum Enclosure Design & Construction Help
    Replies: 0
    Last Post: 06-24-2005, 05:42 PM
  3. winisd help
    By chefboyrlee in forum Enclosure Design & Construction Help
    Replies: 2
    Last Post: 04-04-2005, 10:37 PM
  4. WINisd help
    By runningame21 in forum Enclosure Design & Construction Help
    Replies: 3
    Last Post: 01-20-2004, 12:34 PM
  5. winisd help
    By er1kkull in forum Enclosure Design & Construction Help
    Replies: 7
    Last Post: 06-27-2003, 05:49 PM

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts

1e2 Forum