Bass dosent wobble

[darron016]

Okay thanks ill look for the hz on the app than

[ace_800]

bro you gain only at 65% that means the amp is only puttin out 65% power.

I really hope you were being sarcastic

[splwj47]

I really hope you were being sarcastic

cmon bro, really? of coarse i was lol.

[TheUnderFighter]

dear god.... read the 1st page and couldn't stop laughing.

[Better-Action]

Seriously Darron.... any question you have, Google it. 1 hour of reading and you will be enlightened. I'm not flaming you here, just saying that all the info you are requesting is car audio common knowledge. If you want your setup to sound good, do a little reading and learning. Once you know your stuff, you can make alot out of a little.

These guys know their stuff. Do it right and them comps you got will make you cry when you think of what you paid for them compared to what you could have had.

[slim2fattycake]

Seriously, the info is all out there. Do some reading on your own for yourself.

[darron016]

I have looked around the internet and used google. This was my last resort, and when I did find the same questions on the internet that people asked. The answers didn't go in depth enough, I needed to ask more questions to get a COMPLETE understanding of what i'm doing before I do it

[nu2spl]

Hey I used the search bar and couldnt find the answer to my question.
Whenever I watch youtube videos of people subs, their subs are hitting hard and the sub is going in and out wobbling very fast. IDK the right word. But my subs dont do that.. They vibrate when you look at them, but they dont come out of the sub and back in like some of the videos do.

lmfao dude they only do that because of the camera,its the camera frame rate and the movement of the cone interfering with each other

[jungstah]

I have looked around the internet and used google. This was my last resort, and when I did find the same questions on the internet that people asked. The answers didn't go in depth enough, I needed to ask more questions to get a COMPLETE understanding of what i'm doing before I do it

If you googled a little harder, you would first get a basic understanding of how a speaker works. It makes sound by displacing X amounts of air, then with a little common sense; you'd realize more air displaced = louder and louder = more power. Finally, it should hit you that the guy in the video is running 2k rms while you've got 300. so you've got not power therefore no "wobble"

tl;dr
you need to learn how to google

[4OZGLOVES]

[darron016]

And I guess google would make me understand what too look for in the youtube video, that gives me a clear cut understanding that he was using a 2k amp right? give me a break.

Hey you should send me the google handbook so I can fully understand how to type words into a search bar

[Better-Action]

Try some search terms like this....

What is speaker impedience
What is rms Watts
What is subwoofer excursion
What are thiele small
How to set amp gain
How to Google things
What is a multimeter
What are speaker wires
Ect.
Ect.

[slim2fattycake]

Dude, 5 mins on google should let you know that 65% up on the gain knob doesn't equal 65% of power rated by amp. watching youtube videos of retards just blasting their systems don't improve your understanding of anything.

[darron016]

When I use google it brought me here, now people here are telling me to go back to google.. Sounds like a never ending loop. But hey what do I know?

[jungstah]

And I guess google would make me understand what too look for in the youtube video, that gives me a clear cut understanding that he was using a 2k amp right? give me a break.

Hey you should send me the google handbook so I can fully understand how to type words into a search bar

sure, take away the 2k part and compare your 300w to the power other people are pushing where you see "wobble". it's common sense to click them together really...power moves sub, you have no power therefore your sub doesnt move.