Google Image Result for http://www.sonicelectronix.com/images/kb/amp-bridge.gifQuote:
Originally Posted by iball1804
Printable View
Google Image Result for http://www.sonicelectronix.com/images/kb/amp-bridge.gifQuote:
Originally Posted by iball1804
Yes it's that simpleQuote:
Originally Posted by iball1804
I'm going to do some more car audio shopping and I'll be back. Thanks for all the help guys!
Yes....thsts why it will work perfectly for youQuote:
Originally Posted by iball1804
Not going to be a good choice for you. That 400w is at 1 ohm. You're only gonna see about 200-250 watts of clean power there.Quote:
Originally Posted by iball1804
If you want something that's gonna have better sound quality and options further down the road, I'd look at the Boston I recommended. Otherwise the AP is your best budget bet.
Yeah I'm probably going to go with the Boston
Alright! Here's my total build overlook:
Subwoofer: Sony XPLOD 1200w 12 inch
Wiring Kit: Belva BAK42
Amplifier: Boston Acoustics GT-2125
Head Unit: JVC KD-X50BT
Any thoughts? Suggestions? Thanks!
---------- Post added at 07:18 PM ---------- Previous post was at 07:17 PM ----------
And I'll bridge the two channels on the Boston
That's a great start, if you ever decided you wanted more power on the subs, you could use the Boston to power your front speakers, I'd say you're good to go.
Thanks UnderFire!
I have one last question, and it really has me baffled. According to Sonic Electronix, the back of my stereo headset looks like this:
http://farm9.staticflickr.com/8368/8...3e2f1da664.jpg
What the HECK is that black and pink wire running next to the Bluetooth?? Is that the remote turn on wire? If so, how do I connect it to my kit's remote turn on wire that will run back to the amp?
I still don't know what the pink wire thingy is, but I'm pretty sure the remote turn on wire is in that large bungle of wires (far left in the upperhand corner). Is that correct?
Looks like a 3.5mm jack for an Auxiliary In. Why they have it on the back of the amp baffles me since I've seen them on the front for ages now. I'd look in the manual but am doing a bunch of other stuff ATM.
I was about to say! And the remote wire is NOT on the deck itself, but in that large connector?
The remote wire is almost always in the wiring harness itself. What you're looking at on the right are just USB and Aux inputs. that wiring harness on the left should have the remote wire and is almost always blue or blue with a white stripe.
Gotcha. In the picture I posted earlier, zoom in on the wire on the FAR left, I see a blue wire with a white stripe running down the middle. Actually you probably can't see it, but it's there.
Thanks bro!
No problem, man. Think you're going to be very pleased with that Boston amp. I almost picked one up, but lucked out on my 5-channel Eclipse instead.
---------- Post added at 10:36 AM ---------- Previous post was at 10:35 AM ----------
Btw, if you haven't ordered the HU yet, I'd take a serious look at the classifieds. Lots of good deals going on right now.