Help with silverado system

I got a nbs extended cab silverado. I want a HARDD hitting system in my truck under the backseat. Would 2 CVX 10's be good under the seat? I could put the 2 Kicker CVX 10's in a prefab Sub Thump box. They are rated RMS of 600 watts, So I could run them on a Kicker DX 1000.1 watt amp, feeding them 500 watts a piece. I want it to hit and sound good. When I cut it up, I want the person beside my in traffic to look over and say, "****, why is my car rattling". :D Could I get that with 2 CVX10's on a Kicker DX 1000.1 in a Sub Thump prefab box. If not. what would you recommend for what I want. Thanks! :)

Oh lord. Troll????

no you will not get that .you'll need a pair of 12's and at least 2000 watts.i'm running 4 8's under my back seat in a ported box with about 4000 watts rms .very loud and clean sounding

shittttttt. I was hoping to keep it under $1,000. looks like that isnt happening. well thanks for your input

what year is your truck

Quote:

---

Originally Posted by mylows10

what year is your truck

---

2004

ok you need to raise the back seat 4 inches then build a custom box subs and port forward .the amp and subs can be had from me new for about $900 ,the seat lift shouldnt cost more than $100 at most,box will be about 300 shipped