New Audio Set Up In Mind. Tell me your ideas on this!

[Bakesbaked]

going to run four FI BL 18" subs on a crescendo 5800 @1ohm, in a 38 cubic foot box tuned to 32 hertz. for the front stage, going to put two T1 Rockford tweeters up on a Rockford P300 amp @ 4ohm and then put two Rockford P2 8" in the front door with four Crescendo 6.5s all running on a Crescendo 1100.4 The 8' @ 4 ohm bridged on one side of the amp, the 6.5s bridged @ 4ohm, The Pioneer AVH 4400 for the HU and put two XS D3100 batts in the back and one 350amp tenney alt under the hood. any comments or ideas to improve this system?

[diamondbackjo]

get me a job with you.

[Joseph7195]

A whole lot of pics of the equipment , mount locations and the type of vehicle would be really cool. I know of a lot of guys on this site that have had builds of this size and they could help. So the more information the better.

[Bakesbaked]

A whole lot of pics of the equipment , mount locations and the type of vehicle would be really cool. I know of a lot of guys on this site that have had builds of this size and they could help. So the more information the better.

Will do once the equipment ships in... its going to be a long build though. definitely will be posting some photos very soon here!!

[Joseph7195]

Heck yeah! Build logs are awesome and helps others at the same time

[mylows10]

more alts ,like 2 more and 3 more batteries . 200 ft of 0 gauge wire too

[winkychevelle]

leave the t1 tweet off the headunit and take that rockford 300 and run it to the 8s then run the crescendo 6.5s on each channel of the 1100.4, or just get another 1100.4 for the tweets and the 8s that rockford doesnt match and if its the p300.1 it isnt a true full range amp anyway though it can run quite well up to about 5000hz

[mlstrass]

substage yes, mids/highs no.

Get 2-4 6.5's per door and some nendo supertweeters. 2 per side would be fine.

[>>SQL<<]

with that setup you would not have left / right for your front stage, that would not sound good at all - IMO

[alec14]

you'll need more power..... at least one or two more batteries

[mlstrass]

with that setup you would not have left / right for your front stage, that would not sound good at all - IMO

please explain your logic behind that statement. I run 32 mids/tweets in my set up and have stereo separation.

[Bettr n' Revrse]

Mehhh

[>>SQL<<]

please explain your logic behind that statement. I run 32 mids/tweets in my set up and have stereo separation.

Well the post is a bit hard to understand.

Here is what I am talking about "put two Rockford P2 8" in the front door with four Crescendo 6.5s all running on a Crescendo 1100.4 The 8' @ 4 ohm bridged on one side of the amp, the 6.5s bridged @ 4ohm,"

Sounds to me he wants to take the 4 channel Crescendo 1100.4 and bridge it down to 2 channels

6.5's on 1 channel
8's on the other channel

That would not give you stereo. I fully understand you can have 1,000's of mids / tweeters. But if you do not have them split on left / right you will not have stereo.

[mlstrass]

my bad, did not see the bridged part...

[Bakesbaked]

Well the post is a bit hard to understand.

Here is what I am talking about "put two Rockford P2 8" in the front door with four Crescendo 6.5s all running on a Crescendo 1100.4 The 8' @ 4 ohm bridged on one side of the amp, the 6.5s bridged @ 4ohm,"

Sounds to me he wants to take the 4 channel Crescendo 1100.4 and bridge it down to 2 channels

6.5's on 1 channel
8's on the other channel

That would not give you stereo. I fully understand you can have 1,000's of mids / tweeters. But if you do not have them split on left / right you will not have stereo.

very true thank you for pointing that out! now i decided run the pwx 6.5s all on the 1100.4 and then run the 8's on a t500 tweeters im thinking i will just run on their own amp, think that will work there?