is it possible to tell me box specs

First box is 2.91 ft^3 tuned at ~46.5hz
Second box is 2.90 ft^3 tuned at ~47hz

I just redid the first enclosure to see how close I was. I came up with 1.6 per chamber with a 62.5 tuning(no sub displacement).

However, you say the enclosure is 14.5 tall but the port is only 12.5? Is that accurate? If so, the numbers could change based on the thickness of material used.

Quote:

---

Originally Posted by pro-rabbit

I just redid the first enclosure to see how close I was. I came up with 1.6 per chamber with a 62.5 tuning(no sub displacement).

However, you say the enclosure is 14.5 tall but the port is only 12.5? Is that accurate? If so, the numbers could change based on the thickness of material used.

---

PMing

messed up one of my measurements, CORRECT SPECS ARE UP

both boxes are 41 hz... i bought them being told one was 31 hz and one was 36 hz per chamber. ******* scammer.

I still get 62(ish) on the first enclosure with the new measurements.

Quote:

---

Originally Posted by pro-rabbit

I still get 62(ish) on the first enclosure with the new measurements.

---

i used the12volt box calculator, idk how accurate it is with the chambered ports.

Did you take off port area from the enclosure volume? Also the displacement of the divider?

PM'd again pro-rabbit