The box guy

[Dtrom]

Just curious as to who owned/has owned a Dave the box guy enclosure? I LOVE mine








3.5 cu NET slot port drivers side tuned to 35 hz. Housing my Orion HCCA's. gets super low and sounds great.

[CAT MAN]

his stuff is no different than 80% of us designers/builders.

[Dtrom]

his stuff is no different than 80% of us designers/builders.

I have to disagree. Not putting any of the builders down here cuz their boxes seem very nice. But go to The Box Guy's Facebook or website and look at some of his work. He stands alone.

[CAT MAN]

I have to disagree. Not putting any of the builders down here cuz their boxes seem very nice. But go to The Box Guy's Facebook or website and look at some of his work. He stands alone.

no he doesnt. but whatever floats your boat

[VWGolfMKVI]

I have a Dave the Box Guy enclosure designed for 1 Obsidian 15 tuned to 33hz with two 4" aeroports and uncarpeted 3.25^cu.ft and it cost me $275 shipped. Solid enclosure. But I will stick with Starr Mountain Sound from here on out

Its for sale locally for $50

[Dtrom]

I have a Dave the Box Guy enclosure designed for 1 Obsidian 15 tuned to 33hz with two 4" aeroports and uncarpeted 3.25^cu.ft and it cost me $275 shipped. Solid enclosure. But I will stick with Starr Mountain Sound from here on out

Its for sale locally for $50

Nice. How are the star mountain enclosures?

---------- Post added at 11:57 PM ---------- Previous post was at 11:56 PM ----------

My box was 325$ shipped.

[Kangaroux]

Lol Dave charges so much for boxes it's ridiculous. Built a 4 12" obsidian box for a local with a dual kerf port and charged him less than half of what you paid lol. Box has a flush baffle and also made out of poplar

[Dtrom]

Lol Dave charges so much for boxes it's ridiculous. Built a 4 12" obsidian box for a local with a dual kerf port and charged him less than half of what you paid lol. Box has a flush baffle and also made out of poplar

Shipping plays a big part in his prices.

[whitedragon551]

Shipping plays a big part in his prices.

Even if you paid $80 in shipping its still way over priced.

[Kangaroux]

Shipping plays a big part in his prices.

Trust me, he's shipping enough boxes he probably pays crap for shipping. Just for shits my buddy emailed him to ask how much it would be for like an 8" octoport that was 15" long and he was quoted $250 shipped (my buddy lives less than an hour away from him). He just charges a ton.

[sbelew]

Nice. How are the star mountain enclosures?

---------- Post added at 11:57 PM ---------- Previous post was at 11:56 PM ----------

My box was 325$ shipped.

I bought a Star Mountain box too and they are quite nice, solid enclosures with nice covering. He matched my trunk carpet almost perfectly. And very reasonably priced.

[gumby688]

Wanted to charge me 150 for a box design sheet and cut sheet not even actually building the box am doing the work myself. Kanga get @ me need some help building a wall in my explorer either 6 or 8 hx2's.

EDIT: **** my bad was 150 here is his message

Hey Russ,

I'm not sure if you'll have enough room left for a decent port with (8) 12's in there, but I can try. I can probably figure something out, but worst case, I'm thinking you could run 6 of them and have plenty of room for port. It would be $150 for the wall plans. You can pay directly on the website at the Custom Order Payment page.

Thanks,
Dave
The Box Guy

[Dtrom]

Wanted to charge me 250 for a box design sheet and cut sheet not even actually building the box am doing the work myself. Kanga get @ me need some help building a wall in my explorer either 6 or 8 hx2's.

Dave wanted to charge you that? He charges $40 for blueprints.....

[myjaja]

Never heard of him but Id never spend that much on anyone to build me an enclosure. You sir got bent over and raped without lube and you seem to be satisfied with it.

[splwj47]

hes a fvcking rip off. he wanted to charge me 200 bucks just to build my octoport. prorabbit did it for 90 shipped.