CarAudio.com Veteran
I'm having a problem with my
AudioControl Overdrive (linedriver)
The 2 volt output
5 volt output
7.5 volt output
maximized output
Led lights do NOT light up when connected to my Alpine 9887 subwoofer preout.
Led lights DO work when hooked up to a direct input source such as iPod
Why is this? I'm thinking something is wrong with my preouts and i'm not getting enough voltage signal. If this is the case then how do i check the voltage of my rcas with a dmm exactly?
* DEH-X9500BHS * Audison Bit One* (2) 12" TC Sounds Axis Neo * Hertz HSK 165XL (2-Way Active) * Alpine F6 (150x4)
Go cheap you get cheap
Is the sub level up on the HU, it needs to be on the alpines to make rated per out voltage.
- 2010 Scion tC
- Alpine CDA-117
- JL 450/4v2 Active (Mid range, tweeters) JL 300/2v2 (Mid bass) DC 5K(Subs)
- Hertz HV 165XL
- Hertz HT28
- JL ZR800
- 2 x DD 9512i
- Singer 300 amp 15.1v bypass, 3 XS D3400s
- DD M4a and XS D3100 coming soon
- Viper 5701 with Smart Start
CarAudio.com Veteran
Yes.Originally Posted by HazeGrey75
I should have mentioned that the LED's worked when I first installed the Overdrive 1-2 years ago but it was tucked away so I just noticed recently that they wouldn't light up. When i tested it outside the vehicle they work
* DEH-X9500BHS * Audison Bit One* (2) 12" TC Sounds Axis Neo * Hertz HSK 165XL (2-Way Active) * Alpine F6 (150x4)
CarAudio.com Veteran
My rca's obviously work but maybe not getting full voltage???
I can not get a reading from them with a DMM (set to AC volts)
* DEH-X9500BHS * Audison Bit One* (2) 12" TC Sounds Axis Neo * Hertz HSK 165XL (2-Way Active) * Alpine F6 (150x4)
Posting Permissions
 |
Bookmarks