Re: Please help !!!!
Those amps are 2 ohm stereo and 4 ohm mono stable. Great amps, too.
You will need to run a wire from the pos terminal of the amps left channel to the pos terminal of one of the coils on the sub. Run another wire from that coil's neg terminal to the pos terminal of that sub's other coil. Finally run a wire from that coil's neg terminal to the amps neg on the right channel. Do that for each sub amp combo. That will give you a 4 ohm bridged load and at least 300W to each sub.
Artificial Intelligence is no match for Natural Stupidity.
Never underestimate the power of stupid people in large numbers.
Life's tough...it's even tougher when you're stupid.