i have a dremel trio and i need a 3/8 to 1/2" flush roundover bit. i cant find them on the web or at our home depot. any options, websites, stores to get them at? links would be great or advise. i need one asap thanks!
Banned
i have a dremel trio and i need a 3/8 to 1/2" flush roundover bit. i cant find them on the web or at our home depot. any options, websites, stores to get them at? links would be great or advise. i need one asap thanks!
Kilroy was Here
I doubt the Dremel has the torque needed to spin a decent sized roundover bit. You're going to have to either get a real router or find a friend that has one.
Artificial Intelligence is no match for Natural Stupidity.
Never underestimate the power of stupid people in large numbers.
Life's tough...it's even tougher when you're stupid.
OG.... Original Ginger
^^^ this
the dremels are awesome tools but that takes a lot of balls to do.
R.I.P. 2008 Hyundai Tiburon GS
2005 Subaru Baja turbo, build in planing stages.
CarAudio.com Veteran
^ word on that
Team Flex Issues
4 18" Mayhems
2 bc5500's
Bought from: ameduce(x2), Hatchet_Warrior, jeeper07,DB_DRAG_SPL,ssackett, lyttleviet,MillzThaYungin, blackbonnie, ryan1126, Goindef154(x2), Lonnie, dave_damage
Sold to: Ilovebass, nismos14, chednompton, teen, jonesy
CarAudio.com Veteran
x4
Mine is bigger than yours!
Banned
look up the dremel trio. its a router and dremel in one. and jigsaw
Banned
so what size do i need to flush roundover a 3/4 mdf made box? wil this 3/8 one work?
FREUD 42-100 3/8"Bearing Flush Trim 1"CH 1/4" Shank
OG.... Original Ginger
that is not a round over bit.
R.I.P. 2008 Hyundai Tiburon GS
2005 Subaru Baja turbo, build in planing stages.
CarAudio.com Elite
With the small collet size of 3/16, this is all I have found for that tool:
TR615 Trio 1/8
It's a 1/8'' roundover. May wanna look into buying a larger roundover and grinding down the shaft to fit in the collet.
OG.... Original Ginger
the most i would go with for a round over is 1/4 but thats just me.
R.I.P. 2008 Hyundai Tiburon GS
2005 Subaru Baja turbo, build in planing stages.
Senior VIP Member
That dremel aint got the torque to cut 3/4" wood.
Kia Optima
Stock HU
Eclipse sw 8010
Raw mids and highs-- stock rear doors
100x4 active
[email protected] to sub
SketchUp Master
I normally use 3/8" round-overs.
2,500+ designs since March 2011
Banned
the dremel trio is a freakin router and has a dremel tool on it. its not just a dinky dremel. i have used all the tips no problem. so it does have power, the brand is dremel. its not just a dremel lol
thanks ram
SketchUp Master
The 3/8" roundover also allows you to do a complete half-circle roundover on a 3/4" piece of MDF.
2,500+ designs since March 2011
Banned
^^ what i thought about earlier. just went to home depot and found some ut they dont work because my coilet is only 3/16 FML!
Posting Permissions
|
Bookmarks