Knukonceptz or Kicker?

[galacticmonkey]

Going to buy the dual amp wiring kit, which do you prefer? Dealt with Kicker wire once and it was nice. Never messed with Knu but heard lots of good things about them.

Which would you pick, all pricing aside?

[SEBASTO]

i use Knu ...and that **** is thick ...so Knu >> FTW

[cj407]

cheaper the better...i have the kicker and its nice so is the stinger..the knu is ok...never heard any bad things about either...so it comes down to the customer service and cost...

[yikes vR]

Knu specializes in wire, Kicker does it along with everything else they make.

[dafobbishon3]

new

[2loud4youmorris]

Knu all the way I run it.
I works great.
So thick.
Kicker is a little skinnier and not as flexable.
Also knu wire is also more high current and can get disperse hear better.

[theMessenjah44]

cheaper the better...i have the kicker and its nice so is the stinger..the knu is ok...never heard any bad things about either...so it comes down to the customer service and cost...

I know I worry about customer service with my wire

[Serpent710]

Knu all the way I run it.
I works great.
So thick.
Kicker is a little skinnier and not as flexable.
Also knu wire is also more high current and can get disperse hear better.

kicker 1/0 is pretty **** thick and hyperflex is pretty **** flexible

[gboo559]

Knu. Make sure you get the Kolossus Fleks cause the rest aren't that flexible.

[Racerx250]

Kicker Hyperflex

[RJesus]

Knu all the way I run it.
I works great.
So thick.
Kicker is a little skinnier and not as flexable.
Also knu wire is also more high current and can get disperse hear better.

The choice is so obvious, even the illiterate know the answer.

I can wrap knu around my pinky, easily.
The KMLX isn't nearly as flexible, but its good for cheap runs.
I like to run kmlx, and then change over to the fleks wire when needed (by the engine compartment, the change is done via fuse block)

[FurbiesAndBeans]

I would actually go with kicker on this one. Seems like it gives you more stuff

http://www.knukonceptz.com/productDe...rodID=KFX-PK20

What you get:
- 18 Feet 0 Gauge Blue Kolossus Fleks Power Wire
- 2 Feet 0 Gauge Smoke Kolossus Fleks Ground Wire
- One FH-20 with Choice of Fuse size
- 2 Black / 1 Red 0 Gauge ring terminals
- One KNF-12 Two way Fuse Block with choice of two fuses
- 6 Feet of 4 Gauge Blue Power Wire
- 8 Feet of 4 Gauge Smoke Ground Wire
- 2 Black 4 Gauge ring terminals
- 5 feet Split Loom and wire ties

http://cgi.ebay.com/Kicker-PKD1-0-1-...item439a939ce1

What you get:
- 20 Ft. 1/0 AWG Power Wire
- 3 Ft. 1/0 AWG Ground Wire
- 20 Ft. 16 AWG Remote Lead
- Fuse Holder
- 300A ANL Fuse
- 2 Distribution Blocks
- 5 Ft. 4 AWG Power Wire
- 5 Ft. 4 AWG Ground Wire

So kicker gets 3 more feet of 0 gauge. An extra dist block, but isn't fused. 3 feet less of 4 gauge. No split loom but seems like its tekflexed(sp?). Kicker is also 10 dollars more, but gets free shipping. So it really is a toss up, comes down to personal preference.

[-Leister-]

Knu!

[djarmy2004]

go with the knu wire, as if you do have any questions at all u just email them and they will answer them usually that day or next business day. i have bought from them many times with not a single problem ever

[fasfocus00]

if your comparing the Knu Fleks vs Kicker Hyperflex, price is the only thing that would make my decision as they are both what and what with each other.