Closed Thread
Results 1 to 4 of 4

Reload Thread: Help with Eclipse's E-iSERV

  1. #1
    zhack's Avatar
    zhack is offline shaZAAAM



    Join Date
    Aug 2008
    Location
    Charlottetown, PEI
    Age
    27
    Posts
    27
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Help with Eclipse's E-iSERV

    alright, im trying to register my newly acquired cd5000 on there E-iSERV system, so i can download teh program to do the custom audio adjustments and the custom wallpaper stuff....but i am running into problems with the registration key....it requires a 16 digit key which is supposed to come up on the deck wen its in standby if u press certain buttons...i only get an 8 digit code when i do this.....so i assumed the other 8 digits are the one in the user manual that are under serial number, with a barcode below. so i tried putting the deck 8 digit code along with the other 8 digits in the manual from the warranty page, and no luck, says code unrecognized.

    so is anyone familiar with the E-iSERV registration process, and where the 16 digits come from...any input would be greatly appreciated.

    thanks



    I C U

    HU: Eclipse CD5000
    Sub Amp: RF T3002 and Kicker Dx700
    Sub: 12" Kicker L7 = Fried...new subs to come soon
    ...in process of getting the rest togther




  2. #2
    BassAddictJ's Avatar
    BassAddictJ is offline CarAudio.com Veteran



    Join Date
    Apr 2005
    Location
    FL
    Posts
    12,585
    Post Thanks / Like
    Images
    1
    Mentioned
    5 Post(s)

    Re: Help with Eclipse's E-iSERV

    anyone?



    Team American Power Systems
    Pioneer Avic N5 Navi + CD-UB100 USB Adapter. RARE Circa 1996 PPI Ax606.2 in BLACK (1 of 400ish made) with 2 rare black graphic spacers.
    CDT DRT-25 1'' Silk Dome Tweeters / CDT ES-04 4'' Midranges / RE Audio XXX 6.5'' 2ohm Neo Mids In Glassed Kick Pods
    American Power Systems 240amp H.O. Alty / (2) Deka 8a31, 1/0 front to back.
    Unknown Prototype 3k @ 1ohm. TRF/PSI 8 layer 4in coil hybrid beast in 3 cubs @ 33Hz / Raammat 40sqft in the trunk.
    Quote Originally Posted by Haunz View Post
    You could put 12V to my balls and clamp my dick to get 3kW+.
    Quote Originally Posted by Slayerx View Post
    Glad this got bumped so I could fap to it again.

  3. #3
    smgreen20's Avatar
    smgreen20 is offline phoenixphorum-com



    Join Date
    Apr 2005
    Location
    Lafayette,IN
    Age
    37
    Posts
    1,172
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Help with Eclipse's E-iSERV

    I can't remember the process, but all 16 should be on the deck. The display might only do 8 digits at a time so either wait and see if it displays them after 10 seconds or so, if not then hit the button sequence again to reveal the second set.

    As I look it up in my CD8455 manual it states to, while in standby, press and hold the disp button for more then one second, the first 8 digits will appear then hold down disp again for more then one second and the other 8 digits will be displayed.

    There you go. If you think that's confusing, wait until you get on the E-iServe and register.




    My install
    http://phoenixphorum.com/viewtopic.php?f=10&t=16998

  4. #4
    smgreen20's Avatar
    smgreen20 is offline phoenixphorum-com



    Join Date
    Apr 2005
    Location
    Lafayette,IN
    Age
    37
    Posts
    1,172
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Help with Eclipse's E-iSERV

    As I look back to the time that OP posted this, April 10th, I'm thinking he figured it out.




    My install
    http://phoenixphorum.com/viewtopic.php?f=10&t=16998

Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum