What do you think of my install?

[Nevalite]

Hey,

I just got this install finished, It's my first full install. I had a Kicker ZX750.1 with 8 AWG before but I took all that out and ran 0 awg everywhere. I also did the Big 3 with 0 AWG. The box is also my first one ever, it still needs to be carpeted.

The wiring is a bit slopping right now but I'm going to try and run it a little more stealth under the carpet.

Anyways let me know what you guys think:


Big 3 with 0 AWG Kicker Hyperflex. Stock Alt, funny bat.



Alpine CDA-9883



MRP-M1000 running at 2 Ohms



Pioneer TS-A6962R, the 6.5s are in the doors but I have no pics of them. They are running off the HU (18W) but I plan on putting a small amp in for them.



12" Type-R, 2.4 Cubes tuned to 34 Hz. My first ever box, the pieces of wood are to hold it in place.



It sounds pretty good, I got the gains set and everything with my DMM. For an install in a trunk I find it hits pretty loud in the front, if it were installed in a hatchback it would be killer.

Let me know what you think

Thanks

[dumpin907]

not bad. yo gotta azz load of excess 0/1 back there. you should trim that up a bit. also, you went straight from alt positive to batt positive on your big 3, i hope you have an internal voltage regulator in your alt.

[mtlhead]

looks pretty good for a first install, keep up the good work

[mtlhead]

not bad. yo gotta azz load of excess 0/1 back there. you should trim that up a bit. also, you went straight from alt positive to batt positive on your big 3, i hope you have an internal voltage regulator in your alt.

alt looks stock to me, so it should have a voltage regulator if im not mistaken

[Pl8er]

Very decent man.

100X better than my first

[dumpin907]

alt looks stock to me, so it should have a voltage regulator if im not mistaken

do all stock alts have an internal reg?

[Nevalite]

Yeah I didn't want to cut it all incase I want to re-sell it, there isnt really that much, the pic makes it look worse than it is.

As far as the big 3 goes I thought thats how you were supposed to do it, as long as you put a fuse on it...

[dumpin907]

Yeah I didn't want to cut it all incase I want to re-sell it, there isnt really that much, the pic makes it look worse than it is.

As far as the big 3 goes I thought thats how you were supposed to do it, as long as you put a fuse on it...

yeah i think you should be fine.

[morgans432]

you have it right

[EGGmane]

Nice work, very good for a first time.

[tonyroc14]

more inspiration

[dumpin907]

when do you need an external regulator? and where would you find one?

[brtnboarder3241]

good work

[jbizzle]

Looks good, looks easy as **** do do the big3 on that car

[kovemaster559]

good job , need carpet please!