I like the small footprint class d amps, not sure what to look at when it comes to 5-channel amps though?

Looking for something that does around 50wrms x4 @ 4ohms, and 200x1 @ 4 ohms. ]]>

HU:Kenwood X898

Front: JL C5-653,Q-logic (sound dampened) with tweet and 4in. 6.5 sealed door and foam.

Amp: Soundstream Rubicon 800.5

Sub: Rainbow Hammer 10.

Now to my question. The sound is a bit cold. I know there is a break in period with my components but does my amp have anything to do with the sound? I have a xdi805 that I was going to use for another build but I am tempted to use it in my truck. Any advise? ]]>

Wasn't planning on getting a 4 channel amp, but that's an amazing deal for a 4 channel amp from a good company.

Anyone have anything bad to say about polk amps or where my $90 would be better spent on another amp? ]]>

Front stage: CDT CL-E61NEO - audio Classic Series 6.5" Slim Mount Component speakershttp://www.woofersetc.com/p-5831-cl-e61neo-cdt-audio-classic-series-65-slim-mount-component-speakers.html

Sub: Image Dynamics 8" ID8 V3 D2 - 2 Ohm Subwoofer ID8V.3-D2 - Image Dynamics ID 8" Subwoofer

Amplifier: Soundstream P4.800 Soundstream P4.800 Picasso Series 800W 4-Channel Amplifier

Soundstream P4.800 Picasso Series 800W 4-Channel Amplifier

The speakers are rated at 150 watt RMS @ 120Hz high pass and the sub is rated at Power Handling 150W RMS/300W MAX and the amplifier does:

4 ohms: 125 watts x 4 chan.

2 ohms: 200 watts x 4 chan.

4 ohm, Bridged: 400 watts x 2 chan.

Since the speakers are 4Ohms the amp will give them 125 watts per channel at 4 ohms. According to the amp specs above, the amp can give the sub either 200 watts at 2 ohms or bridged and provided 400 watts for two channels at 4 ohms? Which version of the ID8 should I purchase? 2 or 4 ohms?

I'm basically confused on how bridging the amp would work as far as how many watts it would provide for channels 3 and 4 and for which Ohm (2 or 4). ]]>

650 watts RMS x 1 at 4 ohms (1,100 watts RMS x 1 at 2 ohms)

800 watts RMS x 1 at 1 ohm

CEA-2006 compliant.

I thought lowering the ohms makes higher power so the question is how can it go from.

620@4

1100@2

800@1 ]]>

How does strapping amps affect current from batteries?

Ex. 1 amp wired at 1 ohm pulls 200A from batt. How much would be pulled if 2 amp were strapped? At 1 ohm and 2 ohm?

I have 3 amps with mininal voltage drop,for an experiment I strapped 2 of them I get severe voltage drop instantly at half volume. ]]>

rated at 9900w RMS @ 1 ohm

Triple inputs, these B2's are known for being very efficient

]]>

]]>

So Iv narrowed it down to the Infinity Kappa FOUR and the Rockford R600-4d.

Both seem to have great reviews and I could snatch them for about $230-$240

So if anybody has any input on these or any other 4 channel amp in the same price range that pushes about 100-125 watts per channel I would appreciate it! Thank you! ]]>

I got one of these to run my mids and highs, supposed to have outstanding sound quality, and active capable. I'll follow up after its installed, switching from a Mmats hifi6150. will be playing in about a week.

100w x 4 @4

150w x 4 @ 2 ohms w/ tiffany style inputs

]]>