im new here and im trying to design a box but its getting nowhere. if you want to help a newbie design a box please pm me. thanks
im new here and im trying to design a box but its getting nowhere. if you want to help a newbie design a box please pm me. thanks

i'll help, my PM box is too filled.
well for anyone interested I have talked with him and I kinda have a clue on what hes looking to do. He wants to make a slot vented box for 2 12's powerbase subs. And he wants it loud and to sound good. I dont really know what measurments he has to work with etc. I would help him but I am not good at calcs and stuff with boxes.

32 Hz sounds good.
im building a box for 2 12" powerbass PB-B125D
here are the specs
50 oz. magnet dual 4 ohm vc
power handling 250 watts/ 350 watts peak
sensitivity 87 dB @ 1W/1M
FS= 29.8 HZ, QTS= 0.78, VAS= 118.9 Hz
Frequency Response 30 Hz - 1 kHz
i found this in one of his posts
heres what else i found from his other post if this helps anyone
Originally Posted by mabel4life

whatever, if hes not gonna help us help him, then i'm not gonna bother.
hes offline right now. So I figured I would get started helping him.I cant design him a box or help with him because I am not good at that type of stuff but I can help him this way, and thats all I am trying to do. He is offline and will be posting alot, he has been pming me a few times aday I have been trying to help him out as much as I can and thats why I know some of this stuff. And I told him he should do a post like this and that I would try to help answer questions if he didnt know them. He is new at this stuff.

do you know the reccomended ported enclosure size.
no i dont, but its got to be on there website i cant look now but will later and I will post it
i found all the enclosure stuff from their site. here is the site
http://www.powerbassusa.com/support/doc/pb-paper.pdf
its in the B-series middle one
Bookmarks