id like reccomendations for box size and port for an orion H2 10" dual 4 ohm, i belive after displacement the cuft is .93 specs on the sub are as follows:

Thiele/Small Parameters

Fs (free-air resonance, Hz) 39.06

Vas (equivalent compliance, cu. ft.) 0.37

Vas (equivalent compliance, liters) 10.7

Qms (Q, mechanical) 6.73

Qes (Q, electrical) 0.68

Qts (total driver Q) 0.62

Re (DC resistance, ohms) 7.05

Z (nominal impedance, ohms) 8

Le (inductance, mh) 2.6

Efficiency (2.83v/1M, dB) 82

Xmax (one way linear excursion, in.) 1.14

Xmax (one way linear excursion, mm) 29

Pe (continuous power handling, watts) 2000

Peak power handling (music, watts) 2500

Mms (total moving mass, grams) 186.63

Cms (mechanical compliance, mm/N) 79

Bl (motor strength, Tesla-M) 21.51

Sd (effective radiating area, sq. m.) 0.029

Sd (effective radiating area, sq. in.) 44.95

Frequency range (Hz) 30-2.5k

Energy Bandwidth Product (EBP) 55.41

Driver Physical Dimension

Speaker Displacement (cu. ft) 0.28

Mounting hole diameter (inches) 9.25

Mounting depth (inches *) 7.5

Basket diameter (inches) 11

Recommended Enclosures

1500 watt Sealed enclosure (cu. ft.) 0.66

2500 watt Sealed enclosure (cu. ft.) 0.33

1500 watt Vented enclosure (cu. ft.) 0.65

Port tuning frequency (Hz) 30

Port diameter (inside, in.) 3

Equivalent square port (in.) 2.65x2.65

Port length (in.) 24.7

2500 watt Vented enclosure (cu. ft.) 0.5

Port tuning frequency (Hz) 34

Port diameter (inside, in.) 3

Equivalent square port (in.) 2.65x2.65

Port length (in.) 27.5

## Bookmarks