+ Reply to Thread
Results 1 to 2 of 2

Reload Thread: sundown box design for under truck seat?

  1. #1
    qbx101's Avatar
    qbx101 is offline Junior Member



    Join Date
    Nov 2013
    Location
    garner, nc
    Posts
    1
    Post Thanks / Like
    Mentioned
    0 Post(s)

    sundown box design for under truck seat?

    hey guys so i have a sundown sa12-d2 but it does not fit in my current box. so i plan on building my own i have before so i know i can again. i just need help on dimensions and recommended air space and things like that.

    i want it to be able to hit the lows very well not really concerned about the mids right now. i like my base to shake the truck lol

    the dimensions im going to give are the measurements that would make a box flush against all sides so obviously it will haft to be smaller to accommodate the speaker. it is going to be under the back seat of my 1999 silverado 1500 extended cab with the 3rd door. it will be on the driver side and it can extend all the way to the back of the driver seat if needed. i am not concerned about foot space for that 1 side.

    so here we go

    21" wide (because the floor rises under the center seat)
    25" depth (from the back of the space under the seat to the mounts for the driver seat)
    7."-10.5" height (the seat sit at an angel so at the back its 7" and extends to 10.5" where the seat stops. but then it could get as tall as needed.)

    i hope this is enough information and please reply quick thanks guys







  2. #2
    Synastr's Avatar
    Synastr is offline Member



    Join Date
    Sep 2013
    Location
    Crossville,TN
    Posts
    85
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: sundown box design for under truck seat?

    I built a under the seat box for my tens. Be careful with the height because there's a small bulge on the floor in front of the seat to factor in, as well as how high the subs sit on top the board plus excursion. My box ended up less than 7" high because of those issues. Good luck. Worse case scenario, the seat is easy to raise an inch or 2.




+ Reply to Thread

Similar Threads

  1. looking for local box design for under rear seats
    By hellz in forum Enclosure Design & Construction Help
    Replies: 3
    Last Post: 01-10-2012, 11:51 PM
  2. under seat box design for 03 f150 extended cab
    By Alex JB in forum Enclosure Design & Construction Help
    Replies: 6
    Last Post: 12-05-2008, 01:59 PM
  3. box design for 4 8s in standard cab truck?
    By Jdizzle in forum Enclosure Design & Construction Help
    Replies: 0
    Last Post: 07-27-2005, 07:02 AM
  4. Box for under Dodge seats
    By junocdx in forum Enclosure Design & Construction Help
    Replies: 13
    Last Post: 03-31-2003, 08:31 PM
  5. Box Design For Competition Trucks (Ranger)
    By RangerMan in forum Subwoofers
    Replies: 7
    Last Post: 12-26-2002, 03:35 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts

1e2 Forum